Design and Realization of a Band Pass Filter at D-band Using Gap Waveguide Technology

作者: Jose Luis Vazquez-Roy , Eva Rajo-Iglesias , Giacomo Ulisse , Viktor Krozer

DOI: 10.1007/S10762-020-00729-8

关键词:

摘要: Gap waveguide technology is particularly attractive for the design of passive elements in mm-wave systems. Recently, so-called zero-gap implementation has proved to be very robust manufacturing tolerances, while at same time keeping low loss associated contactless standard gap waveguide. In this paper, a Chebyshev filter working 145 GHz based on idea and intended used wireless communication system designed optimized. A conventional milling technique been its fabrication, good measured results have obtained single-pass process.

参考文章(12)
Eva Rajo-Iglesias, Per-Simon Kildal, Groove gap waveguide: A rectangular waveguide between contactless metal plates enabled by parallel-plate cut-off european conference on antennas and propagation. pp. 1- 4 ,(2010)
Behzad Ahmadi, Ali Banai, Direct Coupled Resonator Filters Realized by Gap Waveguide Technology IEEE Transactions on Microwave Theory and Techniques. ,vol. 63, pp. 3445- 3452 ,(2015) , 10.1109/TMTT.2015.2457916
A. U. Zaman, P. Kildal, A. A. Kishk, Narrow-Band Microwave Filter Using High-Q Groove Gap Waveguide Resonators With Manufacturing Flexibility and No Sidewalls IEEE Transactions on Components, Packaging and Manufacturing Technology. ,vol. 2, pp. 1882- 1889 ,(2012) , 10.1109/TCPMT.2012.2202905
Alberto del Olmo-Olmeda, Mariano Baquero-Escudero, Vicente E. Boria-Esbert, Alejandro Valero-Nogueira, Antonio J. Berenguer-Verdu, A novel band-pass filter topology for millimeter-wave applications based on the groove gap waveguide international microwave symposium. pp. 1- 4 ,(2013) , 10.1109/MWSYM.2013.6697780
E. A. Alos, A. U. Zaman, P. Kildal, Ka-Band Gap Waveguide Coupled-Resonator Filter for Radio Link Diplexer Application IEEE Transactions on Components, Packaging and Manufacturing Technology. ,vol. 3, pp. 870- 879 ,(2013) , 10.1109/TCPMT.2012.2231140
P.-S. Kildal, E. Alfonso, A. Valero-Nogueira, E. Rajo-Iglesias, Local Metamaterial-Based Waveguides in Gaps Between Parallel Metal Plates IEEE Antennas and Wireless Propagation Letters. ,vol. 8, pp. 84- 87 ,(2009) , 10.1109/LAWP.2008.2011147
P. Enoksson, S. Haasl, S. Rahiminejad, A. U. Zaman, H. Raza, P-S Kildal, Micromachined gap waveguides for 100 GHz applications european conference on antennas and propagation. pp. 1935- 1938 ,(2013)
Antonio Berenguer, Vincent Fusco, Dmitry E. Zelenchuk, Daniel Sanchez-Escuderos, Mariano Baquero-Escudero, Vicente E. Boria-Esbert, Propagation Characteristics of Groove Gap Waveguide Below and Above Cutoff IEEE Transactions on Microwave Theory and Techniques. ,vol. 64, pp. 27- 36 ,(2016) , 10.1109/TMTT.2015.2504501
Morteza Rezaee, Ashraf Uz Zaman, Realisation of carved and iris groove gap waveguide filter and E-plane diplexer for V-band radio link application Iet Microwaves Antennas & Propagation. ,vol. 11, pp. 2109- 2115 ,(2017) , 10.1049/IET-MAP.2017.0268
Ali K. Horestani, Mahmoud Shahabadi, Balanced Filter With Wideband Common-Mode Suppression in Groove Gap Waveguide Technology IEEE Microwave and Wireless Components Letters. ,vol. 28, pp. 132- 134 ,(2018) , 10.1109/LMWC.2017.2781136