Realisation of carved and iris groove gap waveguide filter and E-plane diplexer for V-band radio link application
作者： Morteza Rezaee , Ashraf Uz Zaman
DOI: 10.1049/IET-MAP.2017.0268
关键词:
摘要: The gap waveguide technology is a promising candidate as cost-effective and low-loss platform for realizing microwave devices particularly at frequencies higher than 40GHz. In this study, two types of groove filters also diplexer are presented. Coupling mechanism these based on carving the pin plate iris between adjacent cavities. Two fifth-order Chebyshev realised 62.5GHz. proposed consists RX TX centre frequency 59.5 62.5GHz an E-plane T-junction. required transition to WR-15 designed used input port filters. Moreover, T-junction connecting part antenna port. Finally all parts integrated. manufactured in aluminium by sawing milling then silver plating done. passbands around 1.7 2.4% with measured return loss better 13.6dB minimum insertion 0.9 0.8dB, respectively.
core.ac.uk
chalmers.se
sci-hub.se 参考文章(28)
Morteza Rezaee, Ashraf Uz Zaman, Per-Simon Kildal, A groove gap waveguide iris filter for V-band application iranian conference on electrical engineering. pp. 462- 465 ,(2015) , 10.1109/IRANIANCEE.2015.7146259
Behzad Ahmadi, Ali Banai, Direct Coupled Resonator Filters Realized by Gap Waveguide Technology IEEE Transactions on Microwave Theory and Techniques. ,vol. 63, pp. 3445- 3452 ,(2015) , 10.1109/TMTT.2015.2457916
Elena Pucci, Ashraf Uz Zaman, Eva Rajo‐Iglesias, Per‐Simon Kildal, Ahmed Kishk, Study of Q-factors of ridge and groove gap waveguide resonators Iet Microwaves Antennas & Propagation. ,vol. 7, pp. 900- 908 ,(2013) , 10.1049/IET-MAP.2013.0081
Hasan Raza, Jian Yang, Per‐Simon Kildal, Esperanza Alfonso, Resemblance between gap waveguides and hollow waveguides Iet Microwaves Antennas & Propagation. ,vol. 7, pp. 1221- 1227 ,(2013) , 10.1049/IET-MAP.2013.0178
A. U. Zaman, P. Kildal, A. A. Kishk, Narrow-Band Microwave Filter Using High-Q Groove Gap Waveguide Resonators With Manufacturing Flexibility and No Sidewalls IEEE Transactions on Components, Packaging and Manufacturing Technology. ,vol. 2, pp. 1882- 1889 ,(2012) , 10.1109/TCPMT.2012.2202905
Astrid Algaba Brazalez, Ashraf Uz Zaman, Per-Simon Kildal, Improved Microstrip Filters Using PMC Packaging by Lid of Nails IEEE Transactions on Components, Packaging and Manufacturing Technology. ,vol. 2, pp. 1075- 1084 ,(2012) , 10.1109/TCPMT.2012.2190931
J. Dittloff, F. Arndt, Computer-aided design of slit-coupled H-plane T-junction diplexers with E-plane metal-insert filters IEEE Transactions on Microwave Theory and Techniques. ,vol. 36, pp. 1833- 1840 ,(1988) , 10.1109/22.17420
Ashraf Uz Zaman, Mats Alexanderson, Tin Vukusic, Per-Simon Kildal, Gap Waveguide PMC Packaging for Improved Isolation of Circuit Components in High-Frequency Microwave Modules IEEE Transactions on Components, Packaging and Manufacturing Technology. ,vol. 4, pp. 16- 25 ,(2014) , 10.1109/TCPMT.2013.2271651
E. Rajo-Iglesias, P.-S. Kildal, Numerical studies of bandwidth of parallel-plate cut-off realised by a bed of nails, corrugations and mushroom-type electromagnetic bandgap for use in gap waveguides IET Microwaves, Antennas & Propagation. ,vol. 5, pp. 282- 289 ,(2011) , 10.1049/IET-MAP.2010.0073
Babak Molaei, Ali Khaleghi, A Novel Wideband Microstrip Line to Ridge Gap Waveguide Transition Using Defected Ground Slot IEEE Microwave and Wireless Components Letters. ,vol. 25, pp. 91- 93 ,(2015) , 10.1109/LMWC.2014.2382658