Energy management scheme for an ink-jet printer
作者： Brian Canfield , John Wade
DOI:
关键词:
摘要: A method for operating a thermal ink jet printer having printhead (19) with firing heater resistors (17) responsive to pulses provided interconnecting pads the by driver (13) which receives supply voltage from power (15). The includes steps of measuring pad resistance that is representative interconnect each resistors, detecting target energy and pulse width printhead, computing width, calculating will cause provide setting approximately equal voltage, actual supply, determining an measured resistance, selecting based on energy.
lens.org 参考文章(6)
Eiichi Sasaki, Takashi Mori, Thermal transfer type printing device ,(1989)
Kazuhiro Sato, Tire chain for the protection and slip prevention of vehicle tires ,(1975)
Richard V. LaDonna, Thomas A. Tellier, Joseph F. Stephany, Thomas E. Watrobski, Joseph J. Wysocki, Gary A. Kneezel, William G. Hawkins, Electronic spot size control in a thermal ink jet printer ,(1993)
Harald Dipl Ing Schulz, Wolfgang Dipl Ing Schullerus, Wolfgang Dr Ing Wehl, Setting pulse voltage level for heating resistance of ink jet printer - comparing measured resistance with stored value in electronic unit ,(1990)
William S. Moore, Ray A. Mcsparran, James R. Wooden, Apparatus and method for detecting failure of thermal heaters in ink jet printers ,(1990)