Combustion synthesis of TiC–NiAl composite by induction heating
作者： X. Zhu , T. Zhang , D. Marchant , V. Morris
DOI: 10.1016/J.JEURCERAMSOC.2010.06.002
关键词:
摘要: Abstract The aim of this work was to develop a new process for the synthesis TiC and NiAl/TiC composite in which combustion reaction ignited using high frequency induction heater. High density, two-layer TiC–NiAl composites were also produced process. Temperature profiles during measured with an IR thermometer resolution thermal image camera used monitor Phase transformation investigated XRD SEM characterize microstructure synthesized composites. mechanical properties products evaluated by measuring hardness. results show that complete stoichiometric NiAl produced. found be functions composition processing parameters. mechanism analyzed temperature monitoring, thermodynamic analysis investigation.
kingston.ac.uk
core.ac.uk
elsevier.com
sci-hub.se 参考文章(15)
M.X Gao, Y Pan, F.J Oliveira, J.L Baptista, J.M Vieira, Interpenetrating microstructure and fracture mechanism of NiAl/TiC composites by pressureless melt infiltration Materials Letters. ,vol. 58, pp. 1761- 1765 ,(2004) , 10.1016/J.MATLET.2003.10.060
Colin J. Smithells, Cyril S. Smith, Metals reference book ,(1949)
C. Curfs, X. Turrillas, G.B.M. Vaughan, A.E. Terry, Å. Kvick, M.A. Rodríguez, Al–Ni intermetallics obtained by SHS; A time-resolved X-ray diffraction study Intermetallics. ,vol. 15, pp. 1163- 1171 ,(2007) , 10.1016/J.INTERMET.2007.02.007
C. Curfs, I.G. Cano, G.B.M. Vaughan, X. Turrillas, Å. Kvick, M.A. Rodrı́guez, TiC-NiAl composites obtained by SHS: a time-resolved XRD study Journal of The European Ceramic Society. ,vol. 22, pp. 1039- 1044 ,(2002) , 10.1016/S0955-2219(01)00414-9
Robert C. Weast, CRC Handbook of Chemistry and Physics ,(1973)
B. Moreno, E. Chinarro, J.R. Jurado, Combustion synthesis of the cermet LaCrO3–Ru Journal of the European Ceramic Society. ,vol. 28, pp. 2563- 2566 ,(2008) , 10.1016/J.JEURCERAMSOC.2008.03.026
C.L. Yeh, S.H. Su, H.Y. Chang, Effects of TiC addition on combustion synthesis of NiAl in SHS mode Journal of Alloys and Compounds. ,vol. 398, pp. 85- 93 ,(2005) , 10.1016/J.JALLCOM.2005.02.028
R.M Marin-Ayral, C Pascal, F Martinez, J.C Tedenac, Simultaneous synthesis and densification of titanium nitride by high pressure combustion synthesis Journal of The European Ceramic Society. ,vol. 20, pp. 2679- 2684 ,(2000) , 10.1016/S0955-2219(00)00151-5
C. Sierra, A.J. Vázquez, NiAl coatings on carbon steel by self-propagating high-temperature synthesis assisted with concentrated solar energy: mass influence on adherence and porosity Solar Energy Materials and Solar Cells. ,vol. 86, pp. 33- 42 ,(2005) , 10.1016/J.SOLMAT.2004.06.003
B.B. Khina, B. Formanek, I. Solpan, Limits of applicability of the “diffusion-controlled product growth” kinetic approach to modeling SHS Physica B-condensed Matter. ,vol. 355, pp. 14- 31 ,(2005) , 10.1016/J.PHYSB.2004.09.104