In situ synthesis of NiAl–NbB2 composite powder through combustion synthesis
作者： Naser Sabzianpour , Mohammad Shokati , Ali Hemmati , Ali Akbar Shokati , Nader Parvin
DOI: 10.1016/J.JALLCOM.2012.08.024
关键词:
摘要: Abstract Synthesis of a novel NiAl matrix composite powder reinforced with 0–40 wt.% NbB 2 by combustion synthesis in thermal explosion mode was investigated. The elemental powders Ni, Al, Nb, and amorphous boron were used as starting material. For all compositions final products consisted only the phases. Coarser relatively uniform distribution formed rising content. Microhardness considerably increased from 377 ± 13 HV 0.05 to 866 ± 81 for 40 wt.% . High microhardness, proper size make it good candidate precursor spray application.
sci-hub.se 参考文章(23)
X. Zhu, T. Zhang, D. Marchant, V. Morris, Combustion synthesis of TiC–NiAl composite by induction heating Journal of The European Ceramic Society. ,vol. 30, pp. 2781- 2790 ,(2010) , 10.1016/J.JEURCERAMSOC.2010.06.002
J.T. Guo, C.Y. Cui, Y.X. Chen, D.X. Li, H.Q. Ye, Microstructure, interface and mechanical property of the DS NiAl/Cr(Mo,Hf) composite Intermetallics. ,vol. 9, pp. 287- 297 ,(2001) , 10.1016/S0966-9795(01)00009-7
C.L. Yeh, S.H. Su, H.Y. Chang, Effects of TiC addition on combustion synthesis of NiAl in SHS mode Journal of Alloys and Compounds. ,vol. 398, pp. 85- 93 ,(2005) , 10.1016/J.JALLCOM.2005.02.028
Chung-Kwei Lin, Shi-Shen Hong, Pee-Yew Lee, Formation of NiAl–Al2O3 intermetallic-matrix composite powders by mechanical alloying technique Intermetallics. ,vol. 8, pp. 1043- 1048 ,(2000) , 10.1016/S0966-9795(00)00039-X
O. Ozdemir, S. Zeytin, C. Bindal, Characterization of NiAl with cobalt produced by combustion synthesis Journal of Alloys and Compounds. ,vol. 508, pp. 216- 221 ,(2010) , 10.1016/J.JALLCOM.2010.08.056
V. Morris, D. Marchant, X. Zhu, T. Zhang, Combustion synthesis of NiAl/Al2O3 composites by induction heating Intermetallics. ,vol. 18, pp. 1197- 1204 ,(2010) , 10.1016/J.INTERMET.2010.03.009
J.A. Hawk, D.E. Alman, Abrasive wear behavior of NiAl and NiAl-TiB2 composites Wear. ,vol. 225, pp. 544- 556 ,(1999) , 10.1016/S0043-1648(99)00006-X
Douglas E. Burkes, John J. Moore, Microstructure and kinetics of a functionally graded NiTi–TiCx composite produced by combustion synthesis Journal of Alloys and Compounds. ,vol. 430, pp. 274- 281 ,(2007) , 10.1016/J.JALLCOM.2006.05.008
K.W. Huai, J.T. Guo, Q. Gao, H.T. Li, R. Yang, Microstructure and mechanical behavior of NiAl-based alloy prepared by powder metallurgical route Intermetallics. ,vol. 15, pp. 749- 752 ,(2007) , 10.1016/J.INTERMET.2006.10.024
Y Wang, W Chen, L Wang, Micro-indentation and erosion properties of thermal sprayed NiAl intermetallic-based alloy coatings Wear. ,vol. 254, pp. 350- 355 ,(2003) , 10.1016/S0043-1648(03)00024-3