Model for the prediction of 3D surface topography in 5-axis milling
作者： Sylvain Lavernhe , Yann Quinsat , Claire Lartigue
DOI: 10.1007/S00170-010-2686-3
关键词:
摘要: … lines (called spikes) to the Z axis (tool axis). The … simulation. The model accounts for variations of the local feed rate which is usual in 5-axis milling of sculptured surfaces using a tapered…
springer.com
unirioja.es
archives-ouvertes.fr
sci-hub.se 
hal.science 参考文章(26)
Liam Blunt, Xiangqian Jiang, Advanced Techniques for Assessment Surface Topography: Development of a Basis for 3D Surface Texture Standards "Surfstand" ,(2003)
W.P. Dong, P.J. Sullivan, K.J. Stout, Comprehensive study of parameters for characterising three-dimensional surface topography Wear. ,vol. 178, pp. 45- 60 ,(1994) , 10.1016/0043-1648(94)90128-7
T.J. Ko, H.S. Kim, S.S. Lee, Selection of the machining inclination angle in high-speed ball end milling The International Journal of Advanced Manufacturing Technology. ,vol. 17, pp. 163- 170 ,(2001) , 10.1007/PL00003943
P. Saravanakumar, K.K. Manesh, M. Singaperumal, B. Ramamoorthy, Modelling of fluid continuum considering 3D surface parameters in hydraulic assemblies Precision Engineering-journal of The International Societies for Precision Engineering and Nanotechnology. ,vol. 33, pp. 99- 106 ,(2009) , 10.1016/J.PRECISIONENG.2008.04.003
B.H. Kim, C.N. Chu, Texture prediction of milled surfaces using texture superposition method Computer-aided Design. ,vol. 31, pp. 485- 494 ,(1999) , 10.1016/S0010-4485(99)00045-7
T.R Thomas, B.-G Rosén, N Amini, Fractal characterisation of the anisotropy of rough surfaces Wear. ,vol. 232, pp. 41- 50 ,(1999) , 10.1016/S0043-1648(99)00128-3
Sylvain Lavernhe, Christophe Tournier, Claire Lartigue, Kinematical performance prediction in multi-axis machining for process planning optimization The International Journal of Advanced Manufacturing Technology. ,vol. 37, pp. 534- 544 ,(2008) , 10.1007/S00170-007-1001-4
M. C. Kang, K.K. Kim, D.W. Lee, J. S. Kim, N. K. Kim, Characteristics of Inclined Planes According to the Variations of Cutting Direction in High-Speed Ball-End Milling The International Journal of Advanced Manufacturing Technology. ,vol. 17, pp. 323- 329 ,(2001) , 10.1007/S001700170166
S.J Li, R.S Liu, A.J Zhang, Study on an end milling generation surface model and simulation taking into account of the main axle’s tolerance Journal of Materials Processing Technology. ,vol. 129, pp. 86- 90 ,(2002) , 10.1016/S0924-0136(02)00581-2
K.-D. Bouzakis, P. Aichouh, K. Efstathiou, Determination of the chip geometry, cutting force and roughness in free form surfaces finishing milling, with ball end tools International Journal of Machine Tools and Manufacture. ,vol. 43, pp. 499- 514 ,(2003) , 10.1016/S0890-6955(02)00265-1