Crack growth in a new nickel-based superalloy at elevated temperature

作者: S. Dalby , J. Tong

DOI: 10.1007/S10853-005-6940-2

关键词:

摘要: Crack growth at elevated temperature has been examined in a new fine-grained nickel-based superalloy under triangular, fast-slow, slow-fast, dwell and sustained loading conditions 650 725∘C. The effect of waveform seems to be minimal for base frequencies over 0.01 Hz with mixture time cycle dependent crack observed all but the fast-slow waveform, where remained cycle-dependent rate mostly constant. For less than Hz, load clearly accelerated rates were comparable those load. Creep contribution was found negligible while tip constraint may relevant out-of-plane predominantly conditions.

参考文章(32)
J. Gayda, R.V. Miner, Fatigue crack initiation and propagation in several nickel-base superalloys at 650°C International Journal of Fatigue. ,vol. 5, pp. 135- 143 ,(1983) , 10.1016/0142-1123(83)90026-9
J Tong, Creep, fatigue and oxidation in crack growth in advanced nickel base superalloys International Journal of Fatigue. ,vol. 23, pp. 897- 902 ,(2001) , 10.1016/S0142-1123(01)00049-4
E. Andrieu, R. Molins, H. Ghonem, A. Pineau, Intergranular crack tip oxidation mechanism in a nickel-based superalloy Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 154, pp. 21- 28 ,(1992) , 10.1016/0921-5093(92)90358-8
M. R. Winstone, K. M. Nikbin, G. A. Webster, Modes of failure under creep/fatigue loading of a nickel-based superalloy Journal of Materials Science. ,vol. 20, pp. 2471- 2476 ,(1985) , 10.1007/BF00556076
J.L. Chaboche, Time-independent constitutive theories for cyclic plasticity International Journal of Plasticity. ,vol. 2, pp. 149- 188 ,(1986) , 10.1016/0749-6419(86)90010-0
P. Valerio, M. Gao, R.P. Wei, Environmental enhancement of creep crack growth in inconel 718 by oxygen and water vapor Scripta Metallurgica et Materialia. ,vol. 30, pp. 1269- 1274 ,(1994) , 10.1016/0956-716X(94)90257-7
F.V. Antunes, J.M. Ferreira, C.M. Branco, J. Byme, High temperature fatigue crack growth in Inconel 718 Materials at High Temperatures. ,vol. 17, pp. 439- 448 ,(2000) , 10.1179/MHT.2000.058
A. Saxena, D.E. Hall, D.L. McDowell, Assessment of deflection rate partitioning for analyzing creep crack growth data Engineering Fracture Mechanics. ,vol. 62, pp. 111- 122 ,(1999) , 10.1016/S0013-7944(98)00085-X
Frank E. Hauser, Richard W. Hertzberg, Deformation and Fracture Mechanics of Engineering Materials ,(1976)
Pommier, Bompard, Bauschinger effect of alloys and plasticity-induced crack closure: a finite element analysis Fatigue & Fracture of Engineering Materials & Structures. ,vol. 23, pp. 129- 139 ,(2000) , 10.1046/J.1460-2695.2000.00259.X