Method to reinforce polylactic acid with cellulose nanofibers via a polyhydroxybutyrate carrier system.
作者： Alper Kiziltas , Behzad Nazari , Esra Erbas Kiziltas , Douglas J. Gardner , Yousoo Han
DOI: 10.1016/J.CARBPOL.2015.12.059
关键词:
摘要: The elastic moduli of PLA reinforced with 5 and 10wt.% CNF the carrier, at a frequency (ω) 0.07, were 67% 415% higher, respectively, than that neat PLA. shear viscosity rate 0.01 (η0.01) for PLA+10wt.% was 32% higher matrix. η0.01 5wt.% PHB carrier similar to tensile flexural elasticity nanocomposites continuously increased loading. results mechanical property measurements are in accordance rheological data. appeared be better dispersed (less-aggregated nanofibers) carrier. Possible applications composites studied this research packaging materials, construction auto parts interior applications.
sci-hub.se 参考文章(48)
Min Zhang, Development of polyhydroxybutyrate based blends for compostable packaging Loughborough University. ,(2011)
Ping Qu, Liping Zhang, Yuan Gao, Guofeng Wu, NANOCOMPOSITES OF POLY(LACTIC ACID) REINFORCED WITH CELLULOSE NANOFIBRILS Bioresources. ,vol. 5, pp. 1811- 1823 ,(2010) , 10.15376/BIORES.5.3.1811-1823
Elisabeta Elena Tănase, Mona Elena Popa, Maria Râpă, Ovidiu Popa, PHB/Cellulose Fibers Based Materials: Physical, Mechanical and Barrier Properties Agriculture and Agricultural Science Procedia. ,vol. 6, pp. 608- 615 ,(2015) , 10.1016/J.AASPRO.2015.08.099
Alper Kiziltas, Behzad Nazari, Esra Erbas Kiziltas, Douglas J. S. Gardner, Yousoo Han, Todd S. Rushing, Cellulose NANOFIBER-polyethylene nanocomposites modified by polyvinyl alcohol Journal of Applied Polymer Science. ,vol. 133, ,(2016) , 10.1002/APP.42933
Etzael Espino-Pérez, Julien Bras, Violette Ducruet, Alain Guinault, Alain Dufresne, Sandra Domenek, Influence of chemical surface modification of cellulose nanowhiskers on thermal, mechanical, and barrier properties of poly(lactide) based bionanocomposites European Polymer Journal. ,vol. 49, pp. 3144- 3154 ,(2013) , 10.1016/J.EURPOLYMJ.2013.07.017
Ping Qu, Yitong Zhou, Xiaoli Zhang, Siyu Yao, Liping Zhang, Surface modification of cellulose nanofibrils for poly(lactic acid) composite application Journal of Applied Polymer Science. ,vol. 125, pp. 3084- 3091 ,(2012) , 10.1002/APP.36360
Han-Seung Yang, Douglas J. Gardner, Jacques W. Nader, Characteristic impact resistance model analysis of cellulose nanofibril-filled polypropylene composites Composites Part A-applied Science and Manufacturing. ,vol. 42, pp. 2028- 2035 ,(2011) , 10.1016/J.COMPOSITESA.2011.09.009
Ning Lin, Jin Huang, Peter R. Chang, Jiwen Feng, Jiahui Yu, Surface acetylation of cellulose nanocrystal and its reinforcing function in poly(lactic acid) Carbohydrate Polymers. ,vol. 83, pp. 1834- 1842 ,(2011) , 10.1016/J.CARBPOL.2010.10.047
Deniz Aydemir, Alper Kiziltas, Esra Erbas Kiziltas, Douglas J. Gardner, Gokhan Gunduz, Heat treated wood–nylon 6 composites Composites Part B: Engineering. ,vol. 68, pp. 414- 423 ,(2015) , 10.1016/J.COMPOSITESB.2014.08.040
Haibin Zhao, Zhixiang Cui, Xiaofeng Wang, Lih-Sheng Turng, Xiangfang Peng, Processing and characterization of solid and microcellular poly(lactic acid)/polyhydroxybutyrate-valerate (PLA/PHBV) blends and PLA/PHBV/Clay nanocomposites Composites Part B-engineering. ,vol. 51, pp. 79- 91 ,(2013) , 10.1016/J.COMPOSITESB.2013.02.034