Recent Advances in 3D Printing of Structured Materials for Adsorption and Catalysis Applications.
作者： Fateme Rezaei , Ali A. Rownaghi , Harshul Thakkar , Xin Li , Shane Lawson
DOI: 10.1021/ACS.CHEMREV.1C00060
关键词:
摘要: … Unlike other works, however, this study heated the paste before printing to initiate the COF coordination, followed by varying the solvent evaporation time and centrifugation conditions …
acs.org
sci-hub.st 参考文章(170)
Yan Chen, Kuiren Liu, Fabrication of Ce/N co-doped TiO2/diatomite granule catalyst and its improved visible-light-driven photoactivity Journal of Hazardous Materials. ,vol. 324, pp. 139- 150 ,(2017) , 10.1016/J.JHAZMAT.2016.10.043
Xin Wang, Man Jiang, Zuowan Zhou, Jihua Gou, David Hui, 3D printing of polymer matrix composites: A review and prospective Composites Part B-engineering. ,vol. 110, pp. 442- 458 ,(2017) , 10.1016/J.COMPOSITESB.2016.11.034
Jhonny Azuaje, Carmen R. Tubío, Luz Escalante, Mónica Gómez, Francisco Guitián, Alberto Coelho, Olga Caamaño, Alvaro Gil, Eddy Sotelo, An efficient and recyclable 3D printed α-Al2O3 catalyst for the multicomponent assembly of bioactive heterocycles Applied Catalysis A-general. ,vol. 530, pp. 203- 210 ,(2017) , 10.1016/J.APCATA.2016.11.031
P. Michorczyk, E. Hędrzak, A. Węgrzyniak, Preparation of monolithic catalysts using 3D printed templates for oxidative coupling of methane Journal of Materials Chemistry. ,vol. 4, pp. 18753- 18756 ,(2016) , 10.1039/C6TA08629B
Fateme Rezaei, Shane Lawson, Hooman Hosseini, Harshul Thakkar, Amit Hajari, Saman Monjezi, Ali A. Rownaghi, MOF-74 and UTSA-16 film growth on monolithic structures and their CO2 adsorption performance Chemical Engineering Journal. ,vol. 313, pp. 1346- 1353 ,(2017) , 10.1016/J.CEJ.2016.11.058
Vasudev Pralhad Haribal, Luke M. Neal, Fanxing Li, Oxidative dehydrogenation of ethane under a cyclic redox scheme – Process simulations and analysis Energy. ,vol. 119, pp. 1024- 1035 ,(2017) , 10.1016/J.ENERGY.2016.11.039
Wanshuo Zhang, Shuang Zhang, Wenjie Xin, Hui Liu, Yongchen Shang, Xiangxue Zhu, Shenglin Liu, Longya Xu, Shaped binderless ZSM-11 zeolite catalyst prepared via a dry-gel conversion method: Characterization and application for alkylation of benzene with dimethyl ether☆ Journal of Energy Chemistry. ,vol. 26, pp. 380- 389 ,(2017) , 10.1016/J.JECHEM.2016.12.008
Kun Fu, Yonggang Yao, Jiaqi Dai, Liangbing Hu, Progress in 3D Printing of Carbon Materials for Energy‐Related Applications Advanced Materials. ,vol. 29, pp. 1603486- ,(2017) , 10.1002/ADMA.201603486
R. Girimonte, B. Formisani, F. Testa, Adsorption of CO2 on a confined fluidized bed of pelletized 13X zeolite Powder Technology. ,vol. 311, pp. 9- 17 ,(2017) , 10.1016/J.POWTEC.2017.01.033
Harshul Thakkar, Stephen Eastman, Ahmed Al-Mamoori, Amit Hajari, Ali A. Rownaghi, Fateme Rezaei, Formulation of Aminosilica Adsorbents into 3D-Printed Monoliths and Evaluation of Their CO2 Capture Performance. ACS Applied Materials & Interfaces. ,vol. 9, pp. 7489- 7498 ,(2017) , 10.1021/ACSAMI.6B16732