Mechanical property characterization of carbon nanofiber/epoxy nanocomposites reinforced by GMA-grafted UHMWPE fibers
作者： Mojtaba Ahmadi , Mahmood Masoomi , Somayeh Safi
DOI: 10.1016/J.COMPOSITESB.2015.08.006
关键词:
摘要: Abstract Carbon nanofibers (CNFs) dispersed epoxy resin was reinforced with unidirectional glycidyl methacrylate (GMA) grafted ultra-high molecular weight polyethylene (UHMWPE) fibers. Tensile tests were performed on unfilled, and CNF filled to identify the effect of adding CNFs mechanical properties epoxy. The highest improvement in strength obtained 1 wt% CNF. flexural improvements three-component nanocomposites confirmed by results. combined use GMA-grafted UHMWPE fibers leads a significant synergy nanocomposites. mechanisms such synergism analyzed fracture studies using scanning electron microscopy.
sci-hub.se 参考文章(24)
Mohammad Kamal Hossain, Scanning Electron Microscopy Study of Fiber Reinforced Polymeric Nanocomposites InTech. ,(2012) , 10.5772/35494
B Singh, M Gupta, Anchal Verma, None, Influence of fiber surface treatment on the properties of sisal-polyester composites Polymer Composites. ,vol. 17, pp. 910- 918 ,(1996) , 10.1002/PC.10684
Yuanxin Zhou, Farhana Pervin, Shaik Jeelani, P.K. Mallick, Improvement in mechanical properties of carbon fabric–epoxy composite using carbon nanofibers Journal of Materials Processing Technology. ,vol. 198, pp. 445- 453 ,(2008) , 10.1016/J.JMATPROTEC.2007.07.028
Asghar H Korayem, Mohammad Reza Barati, George P Simon, Xiao Ling Zhao, Wen Hui Duan, None, Reinforcing brittle and ductile epoxy matrices using carbon nanotubes masterbatch Composites Part A-applied Science and Manufacturing. ,vol. 61, pp. 126- 133 ,(2014) , 10.1016/J.COMPOSITESA.2014.02.016
Yutaka Iwahori, Shin Ishiwata, Tomoji Sumizawa, Takashi Ishikawa, Mechanical properties improvements in two-phase and three-phase composites using carbon nano-fiber dispersed resin Composites Part A-applied Science and Manufacturing. ,vol. 36, pp. 1430- 1439 ,(2005) , 10.1016/J.COMPOSITESA.2004.11.017
Lan-Hui Sun, Zoubeida Ounaies, Xin-Lin Gao, Casey A. Whalen, Zhen-Guo Yang, Preparation, characterization, and modeling of carbon nanofiber/epoxy nanocomposites Journal of Nanomaterials. ,vol. 2011, pp. 12- ,(2011) , 10.1155/2011/307589
S. Rana, R. Alagirusamy, M. Joshi, Effect of carbon nanofiber dispersion on the tensile properties of epoxy nanocomposites Journal of Composite Materials. ,vol. 45, pp. 2247- 2256 ,(2011) , 10.1177/0021998311401076
Yuanxin Zhou, Shaik Jeelani, Thomas Lacy, Experimental study on the mechanical behavior of carbon/epoxy composites with a carbon nanofiber-modified matrix Journal of Composite Materials. ,vol. 48, pp. 3659- 3672 ,(2014) , 10.1177/0021998313512348
Ashish Warrier, Ajay Godara, Olivier Rochez, Luca Mezzo, Frederic Luizi, Larissa Gorbatikh, Stepan V. Lomov, Aart Willem VanVuure, Ignaas Verpoest, The effect of adding carbon nanotubes to glass/epoxy composites in the fibre sizing and/or the matrix Composites Part A-applied Science and Manufacturing. ,vol. 41, pp. 532- 538 ,(2010) , 10.1016/J.COMPOSITESA.2010.01.001
Florian H. Gojny, Malte H.G. Wichmann, Bodo Fiedler, Wolfgang Bauhofer, Karl Schulte, Influence of nano-modification on the mechanical and electrical properties of conventional fibre-reinforced composites Composites Part A-applied Science and Manufacturing. ,vol. 36, pp. 1525- 1535 ,(2005) , 10.1016/J.COMPOSITESA.2005.02.007