Review of manufacturing three-dimensional-printed membranes for water treatment.
作者： Merlin N. Issac , Balasubramanian Kandasubramanian
DOI: 10.1007/S11356-020-09452-2
关键词:
摘要: … With the exacerbation of industrialization, water treatment has become a necessary step for … chemical use in saltwater desalinating and wastewater purification plants. Membranes that …
springer.com
sci-hub.st 参考文章(110)
Maths Berlin, Rudolfs K. Zalups, Bruce A. Fowler, Chapter 46 – Mercury Handbook on the Toxicology of Metals (Fourth Edition). pp. 1013- 1075 ,(2015) , 10.1016/B978-0-444-59453-2.00046-9
Zahid Amjad, Reverse osmosis : membrane technology, water chemistry & industrial applications Published in <b>1993</b> in New York by Van Nostrand Reinhold. ,(1993)
Shai Badalov, Yoram Oren, Christopher J. Arnusch, Ink-jet printing assisted fabrication of patterned thin film composite membranes Journal of Membrane Science. ,vol. 493, pp. 508- 514 ,(2015) , 10.1016/J.MEMSCI.2015.06.051
Nima Afshar-Mohajer, Chang-Yu Wu, Thomas Ladun, Didier A. Rajon, Yong Huang, Characterization of particulate matters and total VOC emissions from a binder jetting 3D printer Building and Environment. ,vol. 93, pp. 293- 301 ,(2015) , 10.1016/J.BUILDENV.2015.07.013
H. Bikas, P. Stavropoulos, G. Chryssolouris, Additive manufacturing methods and modelling approaches: a critical review The International Journal of Advanced Manufacturing Technology. ,vol. 83, pp. 389- 405 ,(2016) , 10.1007/S00170-015-7576-2
Seyed Farid Seyed Shirazi, Samira Gharehkhani, Mehdi Mehrali, Hooman Yarmand, Hendrik Simon Cornelis Metselaar, Nahrizul Adib Kadri, Noor Azuan Abu Osman, None, A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing Science and Technology of Advanced Materials. ,vol. 16, pp. 033502- 033502 ,(2015) , 10.1088/1468-6996/16/3/033502
Brent Stucker, Ian Gibson, David W. Rosen, Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing ,(2009)
Surabhi Sharma, K. Balasubramanian, Rajat Arora, Adsorption of arsenic (V) ions onto cellulosic-ferric oxide system: kinetics and isotherm studies Desalination and Water Treatment. ,vol. 57, pp. 9420- 9436 ,(2016) , 10.1080/19443994.2015.1042066
Olga Ivanova, Christopher Williams, Thomas Campbell, None, Additive manufacturing (AM) and nanotechnology: promises and challenges Rapid Prototyping Journal. ,vol. 19, pp. 353- 364 ,(2013) , 10.1108/RPJ-12-2011-0127
Rajat Arora, Nitesh Singh, K. Balasubramanian, Prashant Alegaonkar, Electroless nickel coated nano-clay for electrolytic removal of Hg(II) ions RSC Advances. ,vol. 4, pp. 50614- 50623 ,(2014) , 10.1039/C4RA06988A