Oxidation resistance of Si-coated TZM alloy prepared through combined process of plasma spray and laser surface melting
作者： Jeong-Min KIM , Tae-Hyung HA , Joon-Sik PARK , Hyun-Gil KIM
DOI: 10.1016/S1003-6326(16)64386-8
关键词:
摘要: Abstract Plasma thermal spraying of Si coating layer on titanium–zirconium–molybdenum (Ti–Zr–Mo), TZM alloy, was conducted for the surface protection Mo substrate that is unstable in air at high temperatures. Although plasma alone could protect alloy from oxidation a temperature short time, post laser melting process further improved resistance Si-coated alloy. In case treated specimen, MoSi compounds, mainly 2 phases, were formed during additional annealing process, and be even enhanced. The corrosion behaviors specimens 3.5% NaCl solution also investigated; however, no significant variations with respect to treatment procedure found.
sci-hub.se 参考文章(14)
Yi Wang, Dezhi Wang, Jianhui Yan, Aokui Sun, Preparation and characterization of molybdenum disilicide coating on molybdenum substrate by air plasma spraying Applied Surface Science. ,vol. 284, pp. 881- 888 ,(2013) , 10.1016/J.APSUSC.2013.08.029
T. Marrocco, T. Hussain, D. G. McCartney, P. H. Shipway, Corrosion Performance of Laser Posttreated Cold Sprayed Titanium Coatings Journal of Thermal Spray Technology. ,vol. 20, pp. 909- 917 ,(2011) , 10.1007/S11666-011-9637-X
A. Sova, S. Grigoriev, A. Okunkova, I. Smurov, Cold spray deposition of 316L stainless steel coatings on aluminium surface with following laser post-treatment Surface & Coatings Technology. ,vol. 235, pp. 283- 289 ,(2013) , 10.1016/J.SURFCOAT.2013.07.052
S. Majumdar, Formation of MoSi2 and Al doped MoSi2 coatings on molybdenum base TZM (Mo–0.5Ti–0.1Zr–0.02C) alloy Surface & Coatings Technology. ,vol. 206, pp. 3393- 3398 ,(2012) , 10.1016/J.SURFCOAT.2012.01.062
A.P. Alur, N. Chollacoop, K.S. Kumar, High-temperature compression behavior of Mo–Si–B alloys Acta Materialia. ,vol. 52, pp. 5571- 5587 ,(2004) , 10.1016/J.ACTAMAT.2004.08.035
J. G. Gonzalez-Rodriguez, I. Rosales, M. Casales, L. Martinez, Corrosion resistance of molybdenum silicides in aqueous solutions Journal of Solid State Electrochemistry. ,vol. 9, pp. 691- 697 ,(2005) , 10.1007/S10008-004-0644-4
Chonggui Li, You Wang, Shi Wang, Lixin Guo, Laser surface remelting of plasma-sprayed nanostructured Al2O3–13 wt%TiO2 coatings on magnesium alloy Journal of Alloys and Compounds. ,vol. 503, pp. 127- 132 ,(2010) , 10.1016/J.JALLCOM.2010.04.215
S.P. Chakraborty, S. Banerjee, Kulwant Singh, I.G. Sharma, A.K. Grover, A.K. Suri, Studies on the development of protective coating on TZM alloy and its subsequent characterization Journal of Materials Processing Technology. ,vol. 207, pp. 240- 247 ,(2008) , 10.1016/J.JMATPROTEC.2007.12.075
S. Majumdar, I.G. Sharma, S. Raveendra, I. Samajdar, P. Bhargava, In situ chemical vapour co-deposition of Al and Si to form diffusion coatings on TZM Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 492, pp. 211- 217 ,(2008) , 10.1016/J.MSEA.2008.03.020
M. Qian, D. Li, S.B. Liu, S.L. Gong, Corrosion performance of laser-remelted Al–Si coating on magnesium alloy AZ91D Corrosion Science. ,vol. 52, pp. 3554- 3560 ,(2010) , 10.1016/J.CORSCI.2010.07.010