The Research of Temperature Fields during Hot Rolling for the Strip
作者： Junwei Cheng , Xianzhang Feng , Liangji Chen , Zhiqiang Jiang
DOI: 10.1007/978-3-642-24999-0_66
关键词:
摘要: The hot rolling strip plays an important role in the domestic economy, and its products are widely used industry, agriculture, national defenses civil areas, etc. It can not only be directly as slab sheet, but also raw processed materials of cold rolling, welding tube, banding beam. rough process was analyzing using means FE technology, with consider deformation behavior metal, studying effect environmental temperature, piece initial rollers surface temperature on fields distribution piece. results have significance to improvement mechanical properties quality production.
springer.com
sci-hub.st 参考文章(16)
Faydor L. Litvin, Qiming Lian, Alexander L. Kapelevich, Asymmetric modified spur gear drives: reduction of noise, localization of contact, simulation of meshing and stress analysis Computer Methods in Applied Mechanics and Engineering. ,vol. 188, pp. 363- 390 ,(2000) , 10.1016/S0045-7825(99)00161-9
S.C. Shyu, T.Y. Chang, A.F. Saleeb, Friction-contact analysis using a mixed finite element method Computers & Structures. ,vol. 32, pp. 223- 242 ,(1989) , 10.1016/0045-7949(89)90088-6
C.J. Meyer, D.G. Kröger, Numerical investigation of the effect of fan performance on forced draught air-cooled heat exchanger plenum chamber aerodynamic behaviour Applied Thermal Engineering. ,vol. 24, pp. 359- 371 ,(2004) , 10.1016/J.APPLTHERMALENG.2003.08.009
Seong H Ko, Chul H Park, Hyun C Park, Woonbong Hwang, Vibration control of an arc type shell using active constrained layer damping Smart Materials and Structures. ,vol. 13, pp. 350- 354 ,(2004) , 10.1088/0964-1726/13/2/013
J.R. Bredell, D.G. Kröger, G.D. Thiart, Numerical investigation of fan performance in a forced draft air-cooled steam condenser Applied Thermal Engineering. ,vol. 26, pp. 846- 852 ,(2006) , 10.1016/J.APPLTHERMALENG.2005.09.020
C.J Meyer, D.G Kröger, Air-cooled heat exchanger inlet flow losses Applied Thermal Engineering. ,vol. 21, pp. 771- 786 ,(2001) , 10.1016/S1359-4311(00)00083-1
V. Singhal, S.V. Garimella, A novel valveless micropump with electrohydrodynamic enhancement for high heat flux cooling IEEE Transactions on Advanced Packaging. ,vol. 28, pp. 216- 230 ,(2005) , 10.1109/TADVP.2005.847430
A S M Y Munsi, A. J Waddell, C. A Walker, Vibratory stress relief - an investigation of the torsional stress effect in welded shafts Journal of Strain Analysis for Engineering Design. ,vol. 36, pp. 453- 464 ,(2001) , 10.1243/0309324011514610
R. C. McCLUNG, A literature survey on the stability and significance of residual stresses during fatigue Fatigue & Fracture of Engineering Materials & Structures. ,vol. 30, pp. 173- 205 ,(2007) , 10.1111/J.1460-2695.2007.01102.X
Aleksander Hac, Melinda D. Simpson, Estimation of Vehicle Side Slip Angle and Yaw Rate SAE transactions. ,vol. 109, pp. 1032- 1038 ,(2000) , 10.4271/2000-01-0696