Fracture mechanics based fretting fatigue life predictions in Ti–6Al–4V
作者： P.J. Golden , A.F. Grandt
DOI: 10.1016/J.ENGFRACMECH.2003.10.005
关键词:
摘要: A fracture mechanics based crack propagation analysis is developed to work directly with the output of a contact stress for fretting fatigue. series remote load fatigue tests were conducted on specimens that had previously been subjected loading conditions. The growth these prior induced cracks monitored and compared results from analysis. combined formation was then applied other experiments good success. creation stress-life curves also demonstrated.
unirioja.es
elsevier.com
sci-hub.se 参考文章(22)
Yukitaka Murakami, Stress Intensity Factors Handbook ,(2006)
DC Maxwell, T Nicholas, A Rapid Method for Generation of a Haigh Diagram for High Cycle Fatigue Fatigue and Fracture Mechanics: 29th Volume. pp. 626- 626 ,(1999) , 10.1520/STP14974S
TN Farris, MP Szolwinski, G Harish, Fretting in aerospace structures and materials ASTM special technical publications. pp. 523- 537 ,(2000) , 10.1520/STP14752S
Patrick John Golden, High cycle fatigue of fretting induced cracks PhDT. ,(2001)
J. P. Gallagher, R. H. van Stone, R. E. deLaneuville, P. Gravett, R. S. Bellows, Improved High-Cycle Fatigue (HCF) Life Prediction NASA STI/Recon Technical Report N. ,vol. 03, pp. 05515- ,(2001) , 10.21236/ADA408467
Rajeev Tirumala Pakalapati, Fretting contact of dissimilar isotropic /anisotropic materials PhDT. ,(2001)
L.J. Fellows, D. Nowell, D.A. Hills, On the initiation of fretting fatigue cracks Wear. ,vol. 205, pp. 120- 129 ,(1997) , 10.1016/S0043-1648(96)07302-4
T NICHOLAS, A fracture mechanics methodology assessment for fretting fatigue International Journal of Fatigue. ,vol. 25, pp. 1069- 1077 ,(2003) , 10.1016/S0142-1123(03)00115-4
C Lykins, An evaluation of parameters for predicting fretting fatigue crack initiation International Journal of Fatigue. ,vol. 22, pp. 703- 716 ,(2000) , 10.1016/S0142-1123(00)00036-0
M. H. El Haddad, K. N. Smith, T. H. Topper, Fatigue Crack Propagation of Short Cracks Journal of Engineering Materials and Technology. ,vol. 101, pp. 42- 46 ,(1979) , 10.1115/1.3443647