A similitude approach towards the understanding of low velocity impact characteristics of bi-layered hybrid composite structures
作者： Periyasamy Manikandan , Gin Boay Chai
DOI: 10.1016/J.COMPSTRUCT.2015.04.055
关键词:
摘要: This article discusses the impact behavioral responses of opaque bi-layered metal bonded hybrid composites from geometrically equivalent transparent plastic specimens. Low velocity drop weight experiments were conducted on bi-material laminated plates made brittle acrylic sheet adhesively with ductile polycarbonate layer by a compatible room temperature cure epoxy. Depending nature face (brittle or ductile) battered impactor, induced damage are characterized either as partial complete interface failure that leads to formation radial cracks spalling fracture in layer. The influence relative constituent thickness towards resistance and resultant structural integrity extensively discussed. obtained results similitude study it possible understand behavior fibre laminates under similar conditions. In addition through numerical simulations, energy dissipated via work layers was found be dominant only source create significant difference absorption between hard soft side samples.
sci-hub.se 参考文章(22)
Joyce L. Illinger, Robert W. Lewis, Dennis B. Barr, Effects of Adhesive Structure on Impact Resistance and Optical Properties of Acrylic/Polycarbonate Laminates Springer, Boston, MA. pp. 217- 232 ,(1975) , 10.1007/978-1-4615-8201-4_15
Yanxiong Liu, Benjamin Liaw, Drop-weight impact tests and finite element modeling of cast acrylic plates Polymer Testing. ,vol. 28, pp. 599- 611 ,(2009) , 10.1016/J.POLYMERTESTING.2009.04.008
F.D. Morinière, R.C. Alderliesten, R. Benedictus, Modelling of impact damage and dynamics in fibre-metal laminates – A review International Journal of Impact Engineering. ,vol. 67, pp. 27- 38 ,(2014) , 10.1016/J.IJIMPENG.2014.01.004
H.P Kirchner, R.M Gruver, Localized impact damage in glass Materials Science and Engineering. ,vol. 28, pp. 153- 160 ,(1977) , 10.1016/0025-5416(77)90099-4
M. Sadighi, R.C. Alderliesten, R. Benedictus, Impact resistance of fiber-metal laminates: A review International Journal of Impact Engineering. ,vol. 49, pp. 77- 90 ,(2012) , 10.1016/J.IJIMPENG.2012.05.006
Gin Boay Chai, Periyasamy Manikandan, Low velocity impact response of fibre-metal laminates – A review Composite Structures. ,vol. 107, pp. 363- 381 ,(2014) , 10.1016/J.COMPSTRUCT.2013.08.003
Guocai Wu, J. -M. Yang, The mechanical behavior of GLARE laminates for aircraft structures JOM. ,vol. 57, pp. 72- 79 ,(2005) , 10.1007/S11837-005-0067-4
Y.M. Tsai, H. Kolsky, A study of the fractures produced in glass blocks by impact Journal of the Mechanics and Physics of Solids. ,vol. 15, pp. 263- 278 ,(1967) , 10.1016/0022-5096(67)90016-6
Shengqing Zhu, Gin Boay Chai, Low-velocity impact response of fibre–metal laminates – Experimental and finite element analysis Composites Science and Technology. ,vol. 72, pp. 1793- 1802 ,(2012) , 10.1016/J.COMPSCITECH.2012.07.016
B.Z. Jang, L.C. Chen, C.Z. Wang, H.T. Lin, R.H. Zee, Impact resistance and energy absorption mechanisms in hybrid composites Composites Science and Technology. ,vol. 34, pp. 305- 335 ,(1989) , 10.1016/0266-3538(89)90002-X