Microstructures and mechanical properties of AZ31 magnesium alloys fabricated via vacuum hot-press sintering
作者： Wensheng Liu , Yunzhu Ma , Chao Liu , Lei Wu , Tao Wang
DOI: 10.1016/J.JALLCOM.2021.159473
关键词:
摘要: … However, their poor processing deformability and poor corrosion resistance greatly limit … to prepare the Mg-5.9Zn-0.13Zr alloy, which has a compressive strength of 174 MPa and pore …
sci-hub.st 参考文章(26)
Yoshihito Kawamura, Kentaro Hayashi, Akihisa Inoue, Tsuyoshi Masumoto, Rapidly Solidified Powder Metallurgy Mg97Zn1Y2Alloys with Excellent Tensile Yield Strength above 600 MPa Materials Transactions. ,vol. 42, pp. 1172- 1176 ,(2001) , 10.2320/MATERTRANS.42.1172
Baolong Zheng, Dustin Ashford, Yizhang Zhou, Suveen N. Mathaudhu, Jean-Pierre Delplanque, Enrique J. Lavernia, Influence of mechanically milled powder and high pressure on spark plasma sintering of Mg–Cu–Gd metallic glasses Acta Materialia. ,vol. 61, pp. 4414- 4428 ,(2013) , 10.1016/J.ACTAMAT.2013.04.011
Munekazu Ohno, Rainer Schmid–Fetzer, Thermodynamic assessment of Mg–Al–Mn phase equilibria, focusing on Mg-rich alloys Zeitschrift Fur Metallkunde. ,vol. 96, pp. 857- 869 ,(2005) , 10.3139/146.101125
S. Pawar, X. Zhou, T. Hashimoto, G.E. Thompson, G. Scamans, Z. Fan, Investigation of the microstructure and the influence of iron on the formation of Al8Mn5 particles in twin roll cast AZ31 magnesium alloy Journal of Alloys and Compounds. ,vol. 628, pp. 195- 198 ,(2015) , 10.1016/J.JALLCOM.2014.12.028
Martin Wolff, Thomas Ebel, Michael Dahms, Sintering of Magnesium Advanced Engineering Materials. ,vol. 12, pp. 829- 836 ,(2010) , 10.1002/ADEM.201000038
Adarsh Shukla, Arthur D. Pelton, Thermodynamic Assessment of the Al-Mn and Mg-Al-Mn Systems Journal of Phase Equilibria and Diffusion. ,vol. 30, pp. 28- 39 ,(2009) , 10.1007/S11669-008-9426-5
Zhenya Zhang, Huashun Yu, Shaoqing Wang, Haitao Wang, Guanghui Min, None, Microstructure and Tensile Properties of ZK60 Alloy Fabricated by Simplified Rapid Solidification Powder Metallurgy (S-RS P/M) Process Journal of Materials Science & Technology. ,vol. 26, pp. 151- 155 ,(2010) , 10.1016/S1005-0302(10)60025-4
Fusheng Pan, Zhongxue Feng, Xiyan Zhang, Aitao Tang, The Types and Distribution Characterization of Al-Mn Phases in the AZ61 Magnesium Alloy Procedia Engineering. ,vol. 27, pp. 833- 839 ,(2012) , 10.1016/J.PROENG.2011.12.528
Wen Xie, Yue Liu, De Song Li, Jian Zhang, Zhen Wei Zhang, Jing Bi, Influence of sintering routes to the mechanical properties of magnesium alloy and its composites produced by PM technique Journal of Alloys and Compounds. ,vol. 431, pp. 162- 166 ,(2007) , 10.1016/J.JALLCOM.2006.05.076
E Mora, Gerardo Garcés, Elvira Onorbe, P Pérez, Paloma Adeva, None, High-strength Mg-Zn-Y alloys produced by powder metallurgy Scripta Materialia. ,vol. 60, pp. 776- 779 ,(2009) , 10.1016/J.SCRIPTAMAT.2009.01.012