Electron beam welding of Zr-based BMG/Ni joints: Effect of beam irradiation position on mechanical and microstructural properties
作者： Jonghyun Kim , Y. Kawamura
DOI: 10.1016/J.JMATPROTEC.2007.12.090
关键词:
摘要: Abstract The electron beam welding of 3 mm thick Zr41Be23Ti14Cu12Ni10 bulk metallic glass (BMG) plate to Ni metal was investigated. BMG welded with an acceleration voltage 60 kV, a current 13.5 mA, speed 45 mm/s and dw = 0.2 mm. flexural strength the joint (415 MPa) higher than yield (345 MPa). irradiation position had strong influence on properties. When too far from crystalline metal, no joining achieved, when close it led crystallization in weld.
elsevier.com
sci-hub.se 参考文章(12)
Yoshihito Kawamura, Shinya Kagao, Yasuhide Ohno, Electron beam welding of Zr-based bulk metallic glass to crystalline Zr metal Materials Transactions. ,vol. 42, pp. 2649- 2651 ,(2001) , 10.2320/MATERTRANS.42.2649
Seung Y. Shin, J.H. Kim, D.M. Lee, Jong K. Lee, H.J. Kim, Ha Guk Jeong, Jung Chan Bae, New Cu-Based Bulk Metallic Glasses with High Strength of 2000 MPa Materials Science Forum. pp. 945- 948 ,(2004) , 10.4028/WWW.SCIENTIFIC.NET/MSF.449-452.945
William L. Johnson, Bulk Glass-Forming Metallic Alloys: Science and Technology Mrs Bulletin. ,vol. 24, pp. 42- 56 ,(1999) , 10.1557/S0883769400053252
Jonghyun Kim, Dongmyung Lee, Seungyong Shin, Changhee Lee, Phase evolution in Cu54Ni6Zr22Ti18 bulk metallic glass Nd:YAG laser weld Materials Science and Engineering: A. ,vol. 434, pp. 194- 201 ,(2006) , 10.1016/J.MSEA.2006.06.118
Jonghyun Kim, Y. Kawamura, Electron beam welding of the dissimilar Zr-based bulk metallic glass and Ti metal Scripta Materialia. ,vol. 56, pp. 709- 712 ,(2007) , 10.1016/J.SCRIPTAMAT.2006.12.046
Jong Hyun Kim, Changhee Lee, D.M. Lee, J.H. Sun, S.Y. Shin, J.C. Bae, Pulsed Nd:YAG laser welding of Cu54Ni6Zr22Ti18 bulk metallic glass Materials Science and Engineering: A. ,vol. 449-451, pp. 872- 875 ,(2007) , 10.1016/J.MSEA.2006.02.323
Akihisa Inoue, Stabilization of metallic supercooled liquid and bulk amorphous alloys Acta Materialia. ,vol. 48, pp. 279- 306 ,(2000) , 10.1016/S1359-6454(99)00300-6
Y. Kawamura, Liquid phase and supercooled liquid phase welding of bulk metallic glasses Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 375, pp. 112- 119 ,(2004) , 10.1016/J.MSEA.2003.10.097
Akihisa Inoue, Nobuyuki Nishiyama, Takayuki Matsuda, Preparation of Bulk Glassy Pd 40 Ni 10 Cu 30 P 20 Alloy of 40 mm in Diameter by Water Quenching Materials Transactions Jim. ,vol. 37, pp. 181- 184 ,(1996) , 10.2320/MATERTRANS1989.37.181
A. Peker, W. L. Johnson, A highly processable metallic glass: Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 Applied Physics Letters. ,vol. 63, pp. 2342- 2344 ,(1993) , 10.1063/1.110520