Preparation and characterization of corn cob/polypropylene composite reinforced by wood ash
作者： Yiling Wan , Haijie Wu , Langhuan Huang , Jingxian Zhang , Shaozao Tan
DOI: 10.1007/S00289-017-2149-1
关键词:
摘要: The composite in this case was produced from corn cob flour (CCF), wood ash (WA) and polypropylene (PP). WA with different concentration (1, 3, 5, 10 wt%) served as reinforced filler for cob/plastic composite. In order to increase the interfacial adhesion between matrix filler, maleic grafted PP used compatilizer. results of infrared spectrum, thermogravimetric analysis, scanning electron microscope, mechanical property water absorption were reported. indicated that flexural modulus tensile CCF/WA/PP (CCWPC) increased increasing addition WA. When 10 wt%, they reached 2550 324 MPa, respectively. Furthermore, strength CCWPC lower than those PP. moisture adding loading presence also influenced thermal CCWPC.
springer.com
sci-hub.se 参考文章(45)
Hossein Khanjanzadeh, Hamidreza Pirayesh, Ayoub Salari, Long term hygroscopic characteristics of polypropylene based hybrid composites with and without organo-modified clay European Journal of Wood and Wood Products. ,vol. 71, pp. 211- 218 ,(2013) , 10.1007/S00107-012-0661-4
H. P. S. Abdul Khalil, Aamir H Bhat, EXPLORING “NANO FILLER” BASED ON OIL PALM ASH IN POLYPROPYLENE COMPOSITES Bioresources. ,vol. 6, pp. 1288- 1297 ,(2011) , 10.15376/BIORES.6.2.1288-1297
Hossein Khanjanzadeh, Taghi Tabarsa, Alireza Shakeri, Morphology, dimensional stability and mechanical properties of polypropylene–wood flour composites with and without nanoclay: Journal of Reinforced Plastics and Composites. ,vol. 31, pp. 341- 350 ,(2012) , 10.1177/0731684412438793
Peng Wang, Jianye Liu, Wei Yu, Chixing Zhou, Isothermal Crystallization Kinetics of Highly Filled Wood Plastic Composites: Effect of Wood Particles Content and Compatibilizer Journal of Macromolecular Science, Part B. ,vol. 50, pp. 2271- 2289 ,(2011) , 10.1080/00222348.2011.562070
W.T. Tsai, C.Y. Chang, S.L. Lee, Preparation and characterization of activated carbons from corn cob Carbon. ,vol. 35, pp. 1198- 1200 ,(1997) , 10.1016/S0008-6223(97)84654-4
Omar Faruk, Andrzej K. Bledzki, Laurent M. Matuana, Microcellular foamed wood-plastic composites by different processes : A review Macromolecular Materials and Engineering. ,vol. 292, pp. 113- 127 ,(2007) , 10.1002/MAME.200600406
Jing-Dong Chow, Wan-Lan Chai, Recycling and Application Characteristics of the Fly Ashes from Municipal Solid Waste Incinerator Blended with Waste Polypropylene Environmental Engineering Science. ,vol. 25, pp. 1497- 1506 ,(2008) , 10.1089/EES.2007.0312
Lu Fang, Liang Chang, Wen-jing Guo, Yongping Chen, Zheng Wang, Influence of silane surface modification of veneer on interfacial adhesion of wood–plastic plywood Applied Surface Science. ,vol. 288, pp. 682- 689 ,(2014) , 10.1016/J.APSUSC.2013.10.098
Hasan Ziaei Tabari, Amir Nourbakhsh, Alireza Ashori, Effects of nanoclay and coupling agent on the physico-mechanical, morphological, and thermal properties of wood flour/polypropylene composites Polymer Engineering & Science. ,vol. 51, pp. 272- 277 ,(2011) , 10.1002/PEN.21823