Adequacy of Technical and Commercial Alternatives Applied to Machine Tool Verification Using Laser Tracker
作者： Sergio Aguado , Jorge Santolaria , David Samper , Jesús Velázquez , Carlos Javierre
DOI: 10.3390/APP6040100
关键词:
摘要: Besides presenting a volumetric verification technique that allows characterization of the different geometric errors machine tool (MT) depending on its kinematic chain and geometry through model, this paper investigates influence measurement tools techniques available final accuracy MT. Volumetric based laser tracker (LT) relates coordinates with LT, including it into model. Using non-lineal optimization process, approximation functions characterize joint MT are obtained. However, data will be affected by previous compensation MT, system, LT technology, type retroreflector used, used to improve accuracy, among other sources errors. This studies adequacy commercial alternatives such as: retroreflectors, LTs from manufacturers, etc., can applied in using long-range As is strongly uncertainty angular encoders, multilateration tries only radial information. Nonetheless, new bundle adjustment which uses information presented current metrology software. both analyzes their for too.
core.ac.uk
sci-hub.se 参考文章(27)
J. Conte, A. C. Majarena, S. Aguado, R. Acero, J. Santolaria, Calibration strategies of laser trackers based on network measurements The International Journal of Advanced Manufacturing Technology. ,vol. 83, pp. 1161- 1170 ,(2016) , 10.1007/S00170-015-7661-6
N.A Barakat, M.A Elbestawi, A.D Spence, Kinematic and geometric error compensation of a coordinate measuring machine International Journal of Machine Tools and Manufacture. ,vol. 40, pp. 833- 850 ,(2000) , 10.1016/S0890-6955(99)00098-X
H. Schwenke, M. Franke, J. Hannaford, H. Kunzmann, Error mapping of CMMs and machine tools by a single tracking interferometer CIRP Annals. ,vol. 54, pp. 475- 478 ,(2005) , 10.1016/S0007-8506(07)60148-6
Wenjie Tian, Weiguo Gao, Dawei Zhang, Tian Huang, A general approach for error modeling of machine tools International Journal of Machine Tools and Manufacture. ,vol. 79, pp. 17- 23 ,(2014) , 10.1016/J.IJMACHTOOLS.2014.01.003
C.Read Predmore, Bundle adjustment of multi-position measurements using the Mahalanobis distance Precision Engineering-journal of The International Societies for Precision Engineering and Nanotechnology. ,vol. 34, pp. 113- 123 ,(2010) , 10.1016/J.PRECISIONENG.2009.05.003
X Chen, G X Zhang, S Z Zhao, F J Duan, Analysis and Measurement for the Optical Error of the Cat's Eye Retro-Reflector Journal of Physics: Conference Series. ,vol. 48, pp. 64- 68 ,(2006) , 10.1088/1742-6596/48/1/012
H. Kunzmann, E. Trapet, F. Wäldele, A Uniform Concept for Calibration, Acceptance Test, and Periodic Inspection of Coordinate Measuring Machines Using Reference Objects CIRP Annals. ,vol. 39, pp. 561- 564 ,(1990) , 10.1016/S0007-8506(07)61119-6
Michael Gebhardt, Josef Mayr, Nils Furrer, Tobias Widmer, Sascha Weikert, Wolfgang Knapp, High precision grey-box model for compensation of thermal errors on five-axis machines CIRP Annals. ,vol. 63, pp. 509- 512 ,(2014) , 10.1016/J.CIRP.2014.03.029
Daisuke Kono, Atsushi Matsubara, Iwao Yamaji, Tomoya Fujita, High-precision machining by measurement and compensation of motion error International Journal of Machine Tools and Manufacture. ,vol. 48, pp. 1103- 1110 ,(2008) , 10.1016/J.IJMACHTOOLS.2008.02.005
S Aguado, D Samper, J Santolaria, J J Aguilar, Towards an effective identification strategy in volumetric error compensation of machine tools Measurement Science and Technology. ,vol. 23, pp. 065003- ,(2012) , 10.1088/0957-0233/23/6/065003