Scuffing Behavior of Al-Si Alloy Modified by Fine Particle Bombarding and Powder Impact Plating Hybrid Surface Treatment
作者： Dongfang Zeng , Liantao Lu , Ning Zhang , Yanhua Gong , Yuanbin Zhang
DOI: 10.1080/10402004.2016.1261314
关键词:
摘要: ABSTRACTThe occurrence of scuffing is widely observed on tribological components made Al-Si alloys. The object this study to investigate the behavior alloy modified by fine particle bombarding (FPB) and powder impact plating (PIP) hybrid surface treatment. FPB treatment, PIP treatment consisting were conducted samples. morphology, microstructure, hardness samples examined. Block-on-ring tests performed resistance test results show that depends friction coefficient. Scuffing improved which increases nanocrystallization reduces coefficient decreasing roughness producing a microdimpled surface. generating an Sn coating sampl...
sci-hub.se 参考文章(31)
Daniel W. Gebretsadik, Jens Hardell, Braham Prakash, Tribological performance of tin-based overlay plated engine bearing materials Tribology International. ,vol. 92, pp. 281- 289 ,(2015) , 10.1016/J.TRIBOINT.2015.06.014
Ning Zhang, Jiwang Zhang, Liantao Lu, Mintang Zhang, Dongfang Zeng, Qingpeng Song, Wear and friction behavior of austempered ductile iron as railway wheel material Materials & Design. ,vol. 89, pp. 815- 822 ,(2016) , 10.1016/J.MATDES.2015.10.037
Q. Wang, H. S. Cheng, M. E. Fine, Wear of Tin Coating and Al-Si Alloy Substrate Against Carburized Steel Under Mixed Lubrication Tribology Transactions. ,vol. 37, pp. 277- 284 ,(1994) , 10.1080/10402009408983293
Andriy Kovalchenko, Oyelayo Ajayi, Ali Erdemir, George Fenske, Izhak Etsion, The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contact. Tribology International. ,vol. 38, pp. 219- 225 ,(2005) , 10.1016/J.TRIBOINT.2004.08.004
A. Dyson, The Failure of Elastohydrodynamic Lubrication of Circumferentially Ground Discs Proceedings of the Institution of Mechanical Engineers. ,vol. 190, pp. 699- 711 ,(1976) , 10.1243/PIME_PROC_1976_190_074_02
Tatsuro Morita, Keita Asakura, Chuji Kagaya, Effect of combination treatment on wear resistance and strength of Ti–6Al–4V alloy Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 618, pp. 438- 446 ,(2014) , 10.1016/J.MSEA.2014.09.042
Tatsuro Morita, Noriaki Uehigashi, Chuji Kagaya, Improvement of Fatigue Strength of Ti6Al4V Alloy by Hybrid Surface Treatment Composed of Plasma Nitriding and Fine-Particle Bombarding Materials Transactions. ,vol. 54, pp. 1719- 1724 ,(2013) , 10.2320/MATERTRANS.M2013228
J. U. Ejiofor, R. G. Reddy, Developments in the processing and properties of particulate Al-Si composites JOM. ,vol. 49, pp. 31- 37 ,(1997) , 10.1007/S11837-997-0008-5
A. Amanov, I.S. Cho, Y.S. Pyoun, C.S. Lee, I.G. Park, Micro-dimpled surface by ultrasonic nanocrystal surface modification and its tribological effects Wear. ,vol. 286, pp. 136- 144 ,(2012) , 10.1016/J.WEAR.2011.06.001
A. Erdemir, Review of engineered tribological interfaces for improved boundary lubrication Tribology International. ,vol. 38, pp. 249- 256 ,(2005) , 10.1016/J.TRIBOINT.2004.08.008