Metal Matrix Composites - Mmc - Turning: Comparison of Tool Materials
作者： C. Borsellino , S. Casto , E. Valvo , V. F. Ruisi
DOI: 10.1007/978-3-7091-2555-7_14
关键词:
摘要: The main properties required to the modem cutting tools be employed in production, are both high wear resistance and chemical stability. In this last years, machining of MMCs several kinds coated have been developed; they characterized by hardness resist relevant strength abrasive action reinforce fibers or particles, arranged inside matrix. turning MMC employ Tungsten Carbide with Polycrystalline Diamond (PCD) shown very effective, whereas expensive thus increasing production costs.
springer.com
sci-hub.st 参考文章(10)
Rees D Rawlings, Frank L Matthews, Composite materials : engineering and science Published in <b>1994</b> in London by Chapman and Hall. ,(1994)
H. Chandrasekaran, J.-O. Johansson, Influence of Processing Conditions and Reinforcement on the Surface Quality of Finish Machined Aluminium Alloy Matrix Composites CIRP Annals. ,vol. 46, pp. 493- 496 ,(1997) , 10.1016/S0007-8506(07)60873-7
L. Iuliano, L. Settineri, A. Gatto, High-speed turning experiments on metal matrix composites Composites Part A-applied Science and Manufacturing. ,vol. 29, pp. 1501- 1509 ,(1998) , 10.1016/S1359-835X(98)00105-5
R. Polini, P. D'Antonio, S. Lo Casto, V.F. Ruisi, E. Traversa, Cutting performance and indentation behaviour of diamond films on Co-cemented tungsten carbide Surface and Coatings Technology. ,vol. 123, pp. 78- 83 ,(2000) , 10.1016/S0257-8972(99)00471-5
K. Weinert, W. König, A Consideration of Tool Wear Mechanism when Machining Metal Matrix Composites (MMC) CIRP Annals. ,vol. 42, pp. 95- 98 ,(1993) , 10.1016/S0007-8506(07)62400-7
N. Tomac, K. Tannessen, F.O. Rasch, Machinability of Particulate Aluminium Matrix Composites CIRP Annals. ,vol. 41, pp. 55- 58 ,(1992) , 10.1016/S0007-8506(07)61151-2
J. Monaghan, P. O'Reilly, The drilling of an Al/SiC metal-matrix composite Journal of Materials Processing Technology. ,vol. 33, pp. 469- 480 ,(1992) , 10.1016/0924-0136(92)90280-6
Hiromichi Yoshikawa, Akio Nishiyama, CVD diamond coated insert for machining high silicon aluminum alloys Diamond and Related Materials. ,vol. 8, pp. 1527- 1530 ,(1999) , 10.1016/S0925-9635(99)00078-3
A.R. Chambers, The machinability of light alloy MMCs Composites Part A-applied Science and Manufacturing. ,vol. 27, pp. 143- 147 ,(1996) , 10.1016/1359-835X(95)00001-I
Anne Lohrli, Chapman and Hall Notes and Queries. ,vol. 32, pp. 377- 378 ,(1985) , 10.1093/NOTESJ/32.3.377-A