Micro Assembly by Micro Resistance Welding with Electro-Thermal Actuators
作者： Cheng-Chi Yeh , Junwei Chung , Chun-Wei Chang , Wensyang Hsu
关键词:
摘要: Here micro resistance welding to assemble Ni structures with electro-thermal actuators is proposed and demonstrated. Since the contact point of two will have large resistance, high local temperature can be generated current passing through due Joule heating. In order move structure provide pressure generate proper between structures, bent-beam are used here. By design on size number actuators, feasible operation parameters identified. It shown that achieved from 4.6 Omega 12 at 7.2 39.3 MPa.
nctu.edu.tw参考文章(5)
G.K. Fedder, J.C. Chang, R.T. Howe, Thermal assembly of polysilicon microactuators with narrow-gap electrostatic comb drive Technical Digest IEEE Solid-State Sensor and Actuator Workshop. pp. 63- 68 ,(1992) , 10.1109/SOLSEN.1992.228275
Jianglong Zhang, Y.C. Lee, Thermal based angle fixing for micromirrors international conference on solid state sensors actuators and microsystems. ,vol. 2, pp. 1470- 1473 ,(2003) , 10.1109/SENSOR.2003.1217054
M.J. Sinclair, A high force low area MEMS thermal actuator intersociety conference on thermal and thermomechanical phenomena in electronic systems. ,vol. 1, pp. 127- 132 ,(2000) , 10.1109/ITHERM.2000.866818
L. Que, J.-S. Park, Y.B. Gianchandani, Bent-beam electro-thermal actuators for high force applications international conference on micro electro mechanical systems. pp. 31- 36 ,(1999) , 10.1109/MEMSYS.1999.746747
G.K. Fedder, R.T. Howe, Thermal assembly of polysilicon microstructures international conference on micro electro mechanical systems. pp. 63- 68 ,(1991) , 10.1109/MEMSYS.1991.114770