Fast time constant estimation for plunge grinding process control
作者： Yongsheng Gao , Barrie Jones
DOI: 10.1016/S0890-6955(98)00024-8
关键词:
摘要: The time constant of a grinding control system indicates the speed response to command and reflects variations wheel condition. In order allow correct continuous adjustment, fast in-process estimation parameter is necessary. significance discussed for plunge process described. An algorithm presented adaptive process. useful geometry-based systems where workpiece size sensor used multiple tasks are implemented. Experimental testing explained comparison between results from those analysis shows that proposed sufficiently accurate effective
elsevier.com
sci-hub.se 参考文章(8)
Y Gao, B Jones, An Optimum Size and Roundness Adaptive Control Method for the Plunge Grinding Process Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. ,vol. 206, pp. 107- 116 ,(1992) , 10.1243/PIME_PROC_1992_206_316_02
H. E. Jenkins, T. R. Kurfess, S. J. Ludwick, Determination of a dynamic grinding model Journal of Dynamic Systems Measurement and Control-transactions of The Asme. ,vol. 119, pp. 289- 293 ,(1997) , 10.1115/1.2801248
J. Webster, Y.W. Zhao, Time-optimum adaptive control of plunge grinding International Journal of Machine Tools & Manufacture. ,vol. 30, pp. 413- 421 ,(1990) , 10.1016/0890-6955(90)90185-L
D. A. Thomas, D. R. Allanson, J. L. Moruzzi, W. Brian Rowe, In-process Identification of System Time Constant for the Adaptive Control of Grinding Journal of Engineering for Industry. ,vol. 117, pp. 194- 201 ,(1995) , 10.1115/1.2803294
I. Inasaki, Monitoring and Optimization of Internal Grinding Process CIRP Annals. ,vol. 40, pp. 359- 362 ,(1991) , 10.1016/S0007-8506(07)62006-X
D.R. Allanson, S. Kelly, S. Terry, J.L. Moruzzi, W.B. Rowe, Coping with Compliance in the Control of Grinding Processes CIRP Annals. ,vol. 38, pp. 311- 314 ,(1989) , 10.1016/S0007-8506(07)62711-5
Katsuhiko Ogata, Modern control engineering ,(1970)
E. Brinksmeier, C. Popp, A selftuning Adaptive Control System for Grinding processes CIRP Annals. ,vol. 40, pp. 355- 358 ,(1991) , 10.1016/S0007-8506(07)62005-8