Ammonium Lignosulfonate Adhesives for Particleboards with pMDI and Furfuryl Alcohol as Crosslinkers

作者: Venla Hemmilä , Stergios Adamopoulos , Reza Hosseinpourpia , Sheikh Ali Ahmed

DOI: 10.3390/POLYM11101633

关键词:

摘要: … react with furfuryl alcohol precursor, furfural, at high acidic conditions, where lignin and furfural are … [63], the effect of polymerization time on the final furfuryl alcohol strength was shown. …

参考文章(52)
Aldo Ballerini, A. Despres, Antonio Pizzi, Non-toxic, zero emission tannin-glyoxal adhesives for wood panels European Journal of Wood and Wood Products. ,vol. 63, pp. 477- 478 ,(2005) , 10.1007/S00107-005-0048-X
Ummi Hani Binti Abdullah, A. Pizzi, Tannin-furfuryl alcohol wood panel adhesives without formaldehyde European Journal of Wood and Wood Products. ,vol. 71, pp. 131- 132 ,(2013) , 10.1007/S00107-012-0629-4
Fatemeh Ferdosian, Zhongshun Yuan, Mark Anderson, Chunbao (Charles) Xu, Sustainable lignin-based epoxy resins cured with aromatic and aliphatic amine curing agents: Curing kinetics and thermal properties Thermochimica Acta. ,vol. 618, pp. 48- 55 ,(2015) , 10.1016/J.TCA.2015.09.012
A. Szczurek, V. Fierro, M. Thébault, A. Pizzi, A. Celzard, Structure and properties of poly(furfuryl alcohol)-tannin polyHIPEs European Polymer Journal. ,vol. 78, pp. 195- 212 ,(2016) , 10.1016/J.EURPOLYMJ.2016.03.037
Ivana Gavrilovic-Grmusa, Manfred Dunky, Jovan Miljkovic, Milanka Djiporovic-Momcilovic, Influence of the viscosity of UF resins on the radial and tangential penetration into poplar wood and on the shear strength of adhesive joints Holzforschung. ,vol. 66, pp. 849- 856 ,(2012) , 10.1515/HF-2011-0177
Sherif Farag, Lamfeddal Kouisni, Jamal Chaouki, None, Lumped Approach in Kinetic Modeling of Microwave Pyrolysis of Kraft Lignin Energy & Fuels. ,vol. 28, pp. 1406- 1417 ,(2014) , 10.1021/EF4023493
Alireza Bastani, Stergios Adamopoulos, Tim Koddenberg, Holger Militz, Study of adhesive bondlines in modified wood with fluorescence microscopy and X-ray micro-computed tomography International Journal of Adhesion and Adhesives. ,vol. 68, pp. 351- 358 ,(2016) , 10.1016/J.IJADHADH.2016.04.006
Ismail Aydin, Cenk Demirkir, Semra Colak, Gursel Colakoglu, Utilization of bark flours as additive in plywood manufacturing European Journal of Wood and Wood Products. ,vol. 75, pp. 63- 69 ,(2017) , 10.1007/S00107-016-1096-0
Pedram Fatehi, Jiachuan Chen, Extraction of Technical Lignins from Pulping Spent Liquors, Challenges and Opportunities Production of Biofuels and Chemicals from Lignin. pp. 35- 54 ,(2016) , 10.1007/978-981-10-1965-4_2