Effect of mixed adhesive joints and tapered plate on stresses in retrofitted beams bonded with a fiber-reinforced polymer plate
作者： A.S. Bouchikhi , A. Megueni , S. Gouasmi , F.B. Boukoulda
DOI: 10.1016/J.MATDES.2013.03.052
关键词:
摘要: Abstract This paper focuses on the reduction of interfacial stresses when using bonded laminates in strengthening existing structures. The presence high that develop near end composite known as edge effect may compromise resistance to failure strengthened structure. It is decrease plate thickness and fitness adhesive (Young modulus) reduces stress concentration at ends. Another way tackle problem proper design shape (tapered plate) mixed joints (MAJs) between adherents. In this paper, a comprehensive finite element (FE) study has been conducted investigate tapering distribution layer retrofitted steel beam with fiber reinforced polymer (FRP) plate, results indicate correct combination can reduce magnitude significantly.
sci-hub.se 参考文章(24)
T. J Stratford, W. G. Duckett, J. M. C Cadei, L. C Hollaway, Strengthening metallic structures using externally bonded fibre-reinforced polymers CIRIA. ,(2004)
Björn Täljsten, STRENGTHENING OF BEAMS BY PLATE BONDING Journal of Materials in Civil Engineering. ,vol. 9, pp. 206- 212 ,(1997) , 10.1061/(ASCE)0899-1561(1997)9:4(206)
Frigyes Thamm, Stress Distribution in Lap Joints With Partially Thinned Adherends Journal of Adhesion. ,vol. 7, pp. 301- 309 ,(1976) , 10.1080/00218467608075061
Adrian R Rispler, Liyong Tong, Grant P. Steven, Michael R Wisnom, Shape optimisation of adhesive fillets International Journal of Adhesion and Adhesives. ,vol. 20, pp. 221- 231 ,(2000) , 10.1016/S0143-7496(99)00047-0
M.N. Reddy, P.K. Sinha, Stresses in adhesive-bonded joints for composites Fibre Science and Technology. ,vol. 8, pp. 33- 47 ,(1975) , 10.1016/0015-0568(75)90013-5
T M ROBERTS, H HAJI KAZEMI, D J OEHLERS, DISCUSSION. THEORETICAL STUDY OF THE BEHAVIOUR OF REINFORCED CONCRETE BEAMS STRENGTHENED BY EXTERNALLY BONDED STEEL PLATES. Proceedings of the Institution of Civil Engineers. ,vol. 87, pp. 651- 663 ,(1989) , 10.1680/IICEP.1989.3785
M.Y. Tsai, D.W. Oplinger, J. Morton, Improved theoretical solutions for adhesive lap joints International Journal of Solids and Structures. ,vol. 35, pp. 1163- 1185 ,(1998) , 10.1016/S0020-7683(97)00097-8
A.S. Bouchikhi, A. Lousdad, A. Megueni, On the reduce of interfacial shear stresses in fiber reinforced polymer plate retrofitted concrete beams Materials & Design. ,vol. 31, pp. 1508- 1515 ,(2010) , 10.1016/J.MATDES.2009.08.006
T.P. Lang, P.K. Mallick, The effect of recessing on the stresses in adhesively bonded single-lap joints International Journal of Adhesion and Adhesives. ,vol. 19, pp. 257- 271 ,(1999) , 10.1016/S0143-7496(98)00069-4
O Rabinovitch, Y Frostig, Experiments and analytical comparison of RC beams strengthened with CFRP composites Composites Part B-engineering. ,vol. 34, pp. 663- 677 ,(2003) , 10.1016/S1359-8368(03)00090-8