Strength comparison of ductile and brittle adhesives under single and repeated impacts
作者： U. Kemiklioglu , O. Sayman , T. Batar , I. F. Soykok , T. Akderya
DOI: 10.1186/S40563-015-0042-4
关键词:
摘要: In this study, the failure strengths of adhesively bonded joints were investigated. The glass fiber epoxy composites used as adherends manufactured by using vacuum assisted resin infusion method (VARIM). joint materials Loctite-9466 and DP-460 a brittle ductile material, respectively. Since of these are close to each other under static loading, applied axial energies determined different levels 5, 10, 15 20 Joules. order determine energy characteristics experiments, impact loadings both single repeated three times same conditions. results showed that two adhesives DP460 changed depending on loadings. This paper is intended give an overview between impacts. addition, it will help for designers who need information mechanical properties
springeropen.com
springer.com
appliedadhesionscience.com
core.ac.uk 参考文章(13)
Shiuh-Chuan Her, Stress analysis of adhesively-bonded lap joints Composite Structures. ,vol. 47, pp. 673- 678 ,(1999) , 10.1016/S0263-8223(00)00052-0
Onur Sayman, Volkan Arikan, Akar Dogan, Ibrahim F Soykok, Tolga Dogan, None, Failure analysis of adhesively bonded composite joints under transverse impact and different temperatures Composites Part B-engineering. ,vol. 54, pp. 409- 414 ,(2013) , 10.1016/J.COMPOSITESB.2013.06.017
Koichiro Kihara, Hiroaki Isono, Hidetoshi Yamabe, Toshio Sugibayashi, A study and evaluation of the shear strength of adhesive layers subjected to impact loads International Journal of Adhesion and Adhesives. ,vol. 23, pp. 253- 259 ,(2003) , 10.1016/S0143-7496(03)00004-6
Antonio F. Ávila, Plı́nio de O. Bueno, An experimental and numerical study on adhesive joints for composites Composite Structures. ,vol. 64, pp. 531- 537 ,(2004) , 10.1016/J.COMPSTRUCT.2003.09.052
Onur Sayman, Mustafa Ozen, Behiye Korkmaz, Elasto-plastic stress distributions in adhesively bonded double lap joints Materials & Design. ,vol. 45, pp. 31- 35 ,(2013) , 10.1016/J.MATDES.2012.09.005
Hyonny Kim, Tulin Kayir, Stephanie L. Mousseau, Mechanisms of damage formation in transversely impacted glass-epoxy bonded lap joints Journal of Composite Materials. ,vol. 39, pp. 2039- 2052 ,(2005) , 10.1177/0021998305052028
Uday K. Vaidya, Abhay R.S. Gautam, Mahesh Hosur, Piyush Dutta, Experimental–numerical studies of transverse impact response of adhesively bonded lap joints in composite structures International Journal of Adhesion and Adhesives. ,vol. 26, pp. 184- 198 ,(2006) , 10.1016/J.IJADHADH.2005.03.013
Onur Sayman, Mustafa Ozen, Adnan Ozel, Teyfik Demir, Behiye Korkmaz, A non-linear elastic-plastic stress analysis in a ductile double-lap joint Science and Engineering of Composite Materials. ,vol. 20, pp. 163- 168 ,(2012) , 10.1515/SECM-2012-0062
A.S. Bouchikhi, A. Megueni, S. Gouasmi, F.B. Boukoulda, Effect of mixed adhesive joints and tapered plate on stresses in retrofitted beams bonded with a fiber-reinforced polymer plate Materials & Design. ,vol. 50, pp. 893- 904 ,(2013) , 10.1016/J.MATDES.2013.03.052
W.C. de Goeij, M.J.L. van Tooren, A. Beukers, Composite adhesive joints under cyclic loading Materials & Design. ,vol. 20, pp. 213- 221 ,(1999) , 10.1016/S0261-3069(99)00032-1