Experimental investigation on mechanical behaviour, modelling and optimization of wear parameters of B4C and graphite reinforced aluminium hybrid composites
作者： A. Baradeswaran , S.C. Vettivel , A. Elaya Perumal , N. Selvakumar , R. Franklin Issac
DOI: 10.1016/J.MATDES.2014.06.054
关键词:
摘要: Abstract Aluminium alloy (AA) 6061 and 7075 were reinforced with 10 wt.% of boron carbide (B 4 C) 5 wt.% graphite through liquid casting technique. The Scanning Electron Microscope (SEM) Energy Dispersive Spectrum (EDS) used for the characterization composites. wear experiment was carried out by using a pin-on-disc apparatus various input parameters like applied load (10, 20, 30 N), sliding speed (0.6, 0.8, 1.0 m/s) distance (1000, 1500, 2000 m). Response Surface Methodology (RSM) MINITAB 14 software to analyse rate hybrid composites aluminium alloys. worn surfaces base alloys studied SEM EDS systems some useful conclusions made.
elsevier.com
sci-hub.se 参考文章(31)
N. Radhika, R. Subramanian, S. Venkat Prasat, Tribological Behaviour of Aluminium/Alumina/Graphite Hybrid Metal Matrix Composite Using Taguchi’s Techniques Journal of Minerals and Materials Characterization and Engineering. ,vol. 10, pp. 427- 443 ,(2011) , 10.4236/JMMCE.2011.105032
S.C. Vettivel, N. Selvakumar, P. Vijay Ponraj, Mechanical Behaviour of Sintered Cu-5%W Nano Powder Composite Procedia Engineering. ,vol. 38, pp. 2874- 2880 ,(2012) , 10.1016/J.PROENG.2012.06.336
S.C. Vettivel, N. Selvakumar, N. Leema, Experimental and prediction of sintered Cu–W composite by using artificial neural networks Materials & Design. ,vol. 45, pp. 323- 335 ,(2013) , 10.1016/J.MATDES.2012.08.056
P. K. Rohatgi, Y. Liu, T. L. Barr, Tribological behavior and surface analysis of tribodeformed AI Alloy-50 Pet graphite particle composites Metallurgical Transactions A. ,vol. 22, pp. 1435- 1441 ,(1991) , 10.1007/BF02660675
A. Baradeswaran, A. Elayaperumal, R. Franklin Issac, A Statistical Analysis of Optimization of Wear Behaviour of Al- Al2O3 Composites Using Taguchi Technique☆ Procedia Engineering. ,vol. 64, pp. 973- 982 ,(2013) , 10.1016/J.PROENG.2013.09.174
A.K. Jha, S.V. Prasad, G.S. Upadhyaya, Dry sliding wear of sintered 6061 aluminium alloy ― graphite particle composites Tribology International. ,vol. 22, pp. 321- 327 ,(1989) , 10.1016/0301-679X(89)90147-3
S.C. Vettivel, N. Selvakumar, N. Leema, A. Haiter Lenin, Electrical resistivity, wear map and modeling of extruded tungsten reinforced copper composite Materials & Design. ,vol. 56, pp. 791- 806 ,(2014) , 10.1016/J.MATDES.2013.11.070
B. Oraon, G. Majumdar, B. Ghosh, Parametric optimization and prediction of electroless Ni–B deposition Materials & Design. ,vol. 28, pp. 2138- 2147 ,(2007) , 10.1016/J.MATDES.2006.05.017
Du Jun, Liu Yao-hui, Yu Si-rong, Li Wen-fang, Dry sliding friction and wear properties of Al2O3 and carbon short fibres reinforced Al–12Si alloy hybrid composites Wear. ,vol. 257, pp. 930- 940 ,(2004) , 10.1016/J.WEAR.2004.05.009
A. Ureña, J. Rams, M. Campo, M. Sánchez, Effect of reinforcement coatings on the dry sliding wear behaviour of aluminium/SiC particles/carbon fibres hybrid composites Wear. ,vol. 266, pp. 1128- 1136 ,(2009) , 10.1016/J.WEAR.2009.03.016