Damage tolerant design of additively manufactured metallic components subjected to cyclic loading: State of the art and challenges
作者： Giovanni Bruno , Rainer Wagener , Thomas Niendorf , Nikolai Kashaev , Giovanni Meneghetti
DOI: 10.1016/J.PMATSCI.2021.100786
关键词:
摘要: Undoubtedly, a better understanding and the further development of approaches for damage tolerant component design of AM parts are among the most significant challenges currently …
coventry.ac.uk
sci-hub.st 参考文章(385)
R. I. Basu, R. Bell, L. Caron, K. J. Kirkhope, Weld Detail Fatigue Life Improvement Techniques ,(1996)
Bernd Randolf Müller, Manfred Paul Hentschel, Micro-Diagnostics: X-ray and Synchrotron Techniques Handbook of Technical Diagnostics. pp. 287- 300 ,(2013) , 10.1007/978-3-642-25850-3_14
A. Borbély, H. Mughrabi, G. Eisenmeier, H.W. Höppel, A finite element modelling study of strain localization in the vicinity of near-surface cavities as a cause of subsurface fatigue crack initiation International Journal of Fracture. ,vol. 115, pp. 227- 232 ,(2002) , 10.1023/A:1016350528652
Chunlei Qiu, Chinnapat Panwisawas, Mark Ward, Hector C. Basoalto, Jeffery W. Brooks, Moataz M. Attallah, On the role of melt flow into the surface structure and porosity development during selective laser melting Acta Materialia. ,vol. 96, pp. 72- 79 ,(2015) , 10.1016/J.ACTAMAT.2015.06.004
Shafaqat Siddique, Muhammad Imran, Miriam Rauer, Michael Kaloudis, Eric Wycisk, Claus Emmelmann, Frank Walther, None, Computed tomography for characterization of fatigue performance of selective laser melted parts Materials & Design. ,vol. 83, pp. 661- 669 ,(2015) , 10.1016/J.MATDES.2015.06.063
F. Chen, S. Chen, X.H. Dong, C.Y. Li, X.T. Hong, X.P. Zhang, Size effects on tensile strength of aluminum–bronze alloy at room temperature Materials & Design. ,vol. 85, pp. 778- 784 ,(2015) , 10.1016/J.MATDES.2015.06.169
Mauro Madia, Uwe Zerbst, Application of the cyclic R-curve method to notch fatigue analysis International Journal of Fatigue. ,vol. 82, pp. 71- 79 ,(2016) , 10.1016/J.IJFATIGUE.2015.06.015
Aref Yadollahi, Nima Shamsaei, Scott M. Thompson, Denver W. Seely, Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 644, pp. 171- 183 ,(2015) , 10.1016/J.MSEA.2015.07.056
Scott M. Thompson, Linkan Bian, Nima Shamsaei, Aref Yadollahi, An overview of Direct Laser Deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics Additive manufacturing. ,vol. 8, pp. 36- 62 ,(2015) , 10.1016/J.ADDMA.2015.07.001
Martin Rund, Radek Procházka, Pavel Konopík, Jan Džugan, Hugo Folgar, Investigation of Sample-size Influence on Tensile Test Results at Different Strain Rates Procedia Engineering. ,vol. 114, pp. 410- 415 ,(2015) , 10.1016/J.PROENG.2015.08.086