Polymer Blends’ Technology for Plastics Recycling
作者： L. A. Utracki
DOI: 10.1007/978-94-017-1626-0_8
关键词:
摘要: Out of the three methods plastic waste recycling, that is, polymer feedstock and energy recovery, former is most desirable. The recycling usually involves: segregation, washing, shredding extruding. During melt-extrusion, material undergoes devolatilization, stabilization, compatibilization, alloying, filtering pelletization. blending, compounding are basic ABC processing steps technology for recycling. Hence, this chapter summarizes these elements blending pertinent in parts: (i) thermodynamics blends, (ii) flow behavior polymers their (iii) blends.
springer.com
sci-hub.st 参考文章(45)
L. A. Utracki, The Rheology of Multiphase Systems Springer Netherlands. pp. 113- 137 ,(1995) , 10.1007/978-94-015-8571-2_5
L. A. Utracki, Polymer alloys and blends ,(1990)
Rheological fundamentals of polymer processing Kluwer Academic Publishers. ,(1995) , 10.1007/978-94-015-8571-2
L. A. Utracki, Two-Phase Polymer Systems ,(1991)
L. A. Utracki, Commercial Polymer Blends ,(2012)
J. M. Ottino, The Kinematics of Mixing: Stretching, Chaos, and Transport ,(1989)
M. A. Huneault, Z. H. Shi, L. A. Utracki, Development of polymer blend morphology during compounding in a twin‐screw extruder. Part IV: A new computational model with coalescence Polymer Engineering and Science. ,vol. 35, pp. 115- 127 ,(1995) , 10.1002/PEN.760350114
Lloyd A. Goettler, Mechanical property enhancement in short-fiber composites through the control of fiber orientation during fabrication Polymer Composites. ,vol. 5, pp. 60- 71 ,(1984) , 10.1002/PC.750050111
Satoshi Yukioka, Takashi Inoue, Ellipsometric analysis on the in situ reactive compatibilization of immiscible polymer blends Polymer. ,vol. 35, pp. 1182- 1186 ,(1994) , 10.1016/0032-3861(94)90009-4
J. T. Lindt, A. K. Ghosh, Fluid mechanics of the formation of polymer blends. Part I: Formation of lamellar structures Polymer Engineering and Science. ,vol. 32, pp. 1802- 1813 ,(1992) , 10.1002/PEN.760322403