Optical Inspection System for the Inner Surface of a Pipe
作者： Zhao Liefeng , Feng Huajun , Li Qi , Ye Tingfeng
DOI: 10.1109/ICEMI.2007.4350517
关键词:
摘要: The inspection for the inner wall is necessary during life of a pipe from production to condemnation. A corresponding optical system has been developed. This uses motion complicated mechanism in axial direction droved by stepper motor, and detection panoramic images illuminated circumferential surface realized hemispherical imaging (HPIS). Irregularities due corrosion or accumulation brass deposits on are inspected this system. experimental reported article following specifications: resolution 0.3 mm at circumference 1.1 pipe, speed 15 mm/s an interval 0.5 mm.
sci-hub.se 参考文章(5)
Robert M. Miner, Methods and apparatus for testing roundness and straightness of pipes and tubings ,(1980)
Mark Fiala, Anup Basu, Hough transform for feature detection in panoramic images Pattern Recognition Letters. ,vol. 23, pp. 1863- 1874 ,(2002) , 10.1016/S0167-8655(02)00159-9
Takahiko Inari, Kazuo Takashima, Masaru Watanabe, Junji Fujimoto, Optical inspection system for the inner surface of a pipe using detection of circular images projected by a laser source Measurement. ,vol. 13, pp. 99- 106 ,(1994) , 10.1016/0263-2241(94)90003-5
Xu Yong, Scheme and Error Analysis of Generatrix Straightness Measurement for Deep Holes with EST Journal of Beijing Institute of Technology. ,(2000)
Jing Pei-zhong, A study on a detection system based on ring laser used for inner wall of deep hole Opto-electronic Engineering. ,(2004)