Characterization of Microstructures Before, During and After Densification
作者： Klaus van Benthem
DOI: 10.1007/978-3-642-31009-6_10
关键词:
摘要: The microstructural characterization of materials is a critical step to understand structure--property relationships in sintered materials. Altering the processing parameters during sintering can lead variations microstructure and, hence, their macroscopic properties. This chapter reviews experimental techniques for atomic resolution defects. Emphasis given variety electron microscopy and how these be used gain more fundamental understanding behavior, such as defect segregation grain growth. recent advent novel situ has enabled atomic-scale investigation densification mechanisms kinetics that occur sintering. A review available presented first results are discussed.
springer.com
sci-hub.se 参考文章(70)
S.J. Pennycook, M.F. Chisholm, A.R. Lupini, M. Varela, K. van Benthem, A.Y. Borisevich, M.P. Oxley, W. Luo, S.T. Pantelides, CHAPTER 9 - Materials Applications of Aberration-Corrected Scanning Transmission Electron Microscopy Advances in Imaging and Electron Physics. ,vol. 153, pp. 327- 384 ,(2008) , 10.1016/S1076-5670(08)01009-4
Adolf Strecker, Ute Bäder, Marion Kelsch, Ute Salzberger, Maria Sycha, Min Gao, Gunther Richter, Klaus van Benthem, Progress in the preparation of cross-sectional TEM specimens by ion-beam thinning Zeitschrift Fur Metallkunde. ,vol. 94, pp. 290- 297 ,(2003) , 10.3139/146.030290
Joseph I. Goldstein, Dale E. Newbury, Joseph R. Michael, Nicholas W.M. Ritchie, John Henry J. Scott, David C. Joy, Scanning Electron Microscopy and X-Ray Microanalysis Transactions of the American Microscopical Society. ,vol. 102, pp. 59- ,(2018) , 10.1007/978-1-4939-6676-9
Ludwig Reimer, Elektronenmikroskopische Untersuchungs- und Präparationsmethoden Springer-Verlag. ,(1959) , 10.1007/978-3-642-86557-2
Rainer Waser, Nanoelectronics and Information Technology: Advanced Electronic Materials and Novel Devices Published in <b>2003</b> in Weinheim by Wiley-VCH. ,(2003)
Marco Cologna, Rishi Raj, Surface Diffusion-Controlled Neck Growth Kinetics in Early Stage Sintering of Zirconia, with and without Applied DC Electrical Field Journal of the American Ceramic Society. ,vol. 94, pp. 391- 395 ,(2011) , 10.1111/J.1551-2916.2010.04088.X
Lucille A. Giannuzzi, Fred A. Stevie, Introduction to focused ion beams : instrumentation, theory, techniques, and practice Introduction to Focused Ion Beams. pp. 193- ,(2005)
Eric A. Stach, Tony Freeman, Andrew M. Minor, Doug K. Owen, John Cumings, Mark A. Wall, Tomas Chraska, Robert Hull, J.W. Morris, A. Zettl, Ulrich Dahmen, Development of a Nanoindenter for In Situ Transmission Electron Microscopy. Microscopy and Microanalysis. ,vol. 7, pp. 507- 517 ,(2001) , 10.1007/S10005-001-0012-4
Z. A. Munir, Analytical treatment of the role of surface oxide layers in the sintering of metals Journal of Materials Science. ,vol. 14, pp. 2733- 2740 ,(1979) , 10.1007/BF00610647
Gayle S. Painter, Frank W. Averill, Paul F. Becher, Naoya Shibata, Klaus van Benthem, Stephen J. Pennycook, First-principles study of rare earth adsorption at {beta}-Si{sub 3}N{sub 4} interfaces Physical Review B. ,vol. 78, pp. 214206- ,(2008) , 10.1103/PHYSREVB.78.214206