Corrugated stainless steels embedded in mortar for 9 years: Corrosion results of non-carbonated, chloride-contaminated samples

作者: A. Bautista , E.C. Paredes , F. Velasco , S.M. Alvarez

DOI: 10.1016/J.CONBUILDMAT.2015.04.060

关键词:

摘要: Abstract Mortar samples reinforced with 5 different corrugated stainless steels were tested for 9 years in 2 conditions: partial immersion (PI) 3.5% NaCl, and chloride addition to the mortar exposure high relative humidity (HRH). The monitoring during exposures was carried out corrosion potential ( E corr ) electrochemical impedance spectroscopy (EIS) measurements. A year before finishing (after 8 years of exposure), anodically polarised obtain more information about pitting resistance passive layers formed under conditions. last established study progress or repassivation pits. PI is most aggressive testing condition it causes low-intensity S20430 austenitic steel after 7 years exposure. S32205 duplex shows very good behaviour.

参考文章(53)
Pedro Castro-Borges, Oladis TROCONIS DE RINCON, Eric I Moreno, Andres Antonio Torres-Acosta, Miguel Martinez-Madrid, Asger Knudsen, None, Performance of a 60-year-old concrete pier with stainless steel reinforcement Materials Performance. ,vol. 41, pp. 50- 55 ,(2002)
Ha-Won Song, Velu Saraswathy, Corrosion Monitoring of Reinforced Concrete Structures - A Review International Journal of Electrochemical Science. ,vol. 2, pp. 1- 28 ,(2007)
Paulo Monteiro, P. K. Mehta, Concrete: Microstructure, Properties, and Materials ,(2005)
A. Bautista, S. M. Alvarez, F. Velasco, Selective corrosion of duplex stainless steel bars in acid. Part 2: Effect of the surface strain and numerical analysis Materials and Corrosion-werkstoffe Und Korrosion. ,vol. 66, pp. 357- 365 ,(2015) , 10.1002/MACO.201307420
M. Stern, A. L. Geaby, Electrochemical Polarization I . A Theoretical Analysis of the Shape of Polarization Curves Journal of The Electrochemical Society. ,vol. 104, pp. 56- 63 ,(1957) , 10.1149/1.2428496
A. Bautista, S. M. Alvarez, F. Velasco, Selective corrosion of duplex stainless steel bars in acid Materials and Corrosion-werkstoffe Und Korrosion. ,vol. 66, pp. 347- 356 ,(2015) , 10.1002/MACO.201307419
M.C. García-Alonso, J.A. González, J. Miranda, M.L. Escudero, M.J. Correia, M. Salta, A. Bennani, Corrosion behaviour of innovative stainless steels in mortar Cement and Concrete Research. ,vol. 37, pp. 1562- 1569 ,(2007) , 10.1016/J.CEMCONRES.2007.08.010
J.T. Pérez-Quiroz, J. Terán, M.J. Herrera, M. Martínez, J. Genescá, Assessment of stainless steel reinforcement for concrete structures rehabilitation Journal of Constructional Steel Research. ,vol. 64, pp. 1317- 1324 ,(2008) , 10.1016/J.JCSR.2008.07.024
L. Freire, X.R. Nóvoa, G. Pena, V. Vivier, On the corrosion mechanism of AISI 204Cu stainless steel in chlorinated alkaline media Corrosion Science. ,vol. 50, pp. 3205- 3212 ,(2008) , 10.1016/J.CORSCI.2008.08.029
M. Criado, D.M. Bastidas, S. Fajardo, A. Fernández-Jiménez, J.M. Bastidas, Corrosion behaviour of a new low-nickel stainless steel embedded in activated fly ash mortars Cement & Concrete Composites. ,vol. 33, pp. 644- 652 ,(2011) , 10.1016/J.CEMCONCOMP.2011.03.014