Microstructure and Properties of Fe-Based Coating on Column Surface Formed by High Frequency Induction Cladding
作者： Huilong Yang , Yufu Sun , Jingjie Shen , Sumeng Hu , Qing Zhao
DOI: 10.4236/JSEMAT.2012.21007
关键词:
摘要: The Fe-based coating was produced on the surface of column substrate with a Al2O3 cylindrical sleeve by high frequency induction cladding, microstructure investigated scanning electron microscope (SEM), crystal structure characterized X-ray diffractometer (XRD), microhardness and wear resisitance were evaluated. results show that metallurgical bond between obtained during rapid solidification, phases composed austenite eutectic γ-Fe + (Cr, Fe)7(C, B)3. Compared substrate, resistance improved apparently, solid-solution strengthening second-phase particle hardening led to these results.
researchgate.net 
sci-hub.st 参考文章(8)
Shufeng Wang, Huiqi Li, Xiang Chen, Jing Chi, Min Li, Lu Chai, Hui Xu, Improving microstructure and wear resistance of plasma clad Fe-based alloy coating by a mechanical vibration technique during cladding Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 528, pp. 397- 401 ,(2010) , 10.1016/J.MSEA.2010.09.021
Hao Chen, Hui-qi Li, Microstructure and wear resistance of Fe-based coatings formed by plasma jet surface metallurgy Materials Letters. ,vol. 60, pp. 1311- 1314 ,(2006) , 10.1016/J.MATLET.2005.10.011
Douglas E Wolfe, Jogender Singh, Krishnan Narasimhan, Synthesis of titanium carbide/chromium carbide multilayers by the co-evaporation of multiple ingots by electron beam physical vapor deposition Surface & Coatings Technology. ,vol. 160, pp. 206- 218 ,(2002) , 10.1016/S0257-8972(02)00404-8
Shengfeng Zhou, Xiaoqin Dai, Laser induction hybrid rapid cladding of WC particles reinforced NiCrBSi composite coatings Applied Surface Science. ,vol. 256, pp. 4708- 4714 ,(2010) , 10.1016/J.APSUSC.2010.02.078
L. Sexton, S. Lavin, G. Byrne, A. Kennedy, Laser cladding of aerospace materials Journal of Materials Processing Technology. ,vol. 122, pp. 63- 68 ,(2002) , 10.1016/S0924-0136(01)01121-9
M. Yan, An experimental study of the remelting of an Fe-C-Cr-Si-B overlay with a microbeam plasma arc Surface & Coatings Technology. ,vol. 99, pp. 132- 139 ,(1998) , 10.1016/S0257-8972(97)00419-2
Soner Buytoz, Microstructural properties of M7C3 eutectic carbides in a Fe–Cr–C alloy Materials Letters. ,vol. 60, pp. 605- 608 ,(2006) , 10.1016/J.MATLET.2005.09.046
X.H. Wang, Z.D. Zou, S.Y. Qu, S.L. Song, Microstructure and wear properties of Fe-based hardfacing coating reinforced by TiC particles Journal of Materials Processing Technology. ,vol. 168, pp. 89- 94 ,(2005) , 10.1016/J.JMATPROTEC.2004.11.001