Analiza stanu wiedzy i techniki w zakresie szlifowalności stopów na bazie niklu
作者： Michał Wojtewicz , Krzysztof Nadolny , Walery Sienicki
DOI: 10.17814/MECHANIK.2015.8-9.395
关键词:
摘要:
sci-hub.st 参考文章(23)
M Wojtewicz, W Sienicki, K Nadolny, Wpływ impregnacji ściernicy pierwiastkami niemetalicznymi na intensywność zalepiania jej czynnej powierzchni Mechanik. ,(2012)
Alessandra Caggiano, Roberto Teti, CBN Grinding Performance Improvement in Aircraft Engine Components Manufacture Procedia CIRP. ,vol. 9, pp. 109- 114 ,(2013) , 10.1016/J.PROCIR.2013.06.177
N E Ye, T R A Pearce, A Comparison of Oil and Water as Grinding Fluids in the Creep Feed Grinding Process Proceedings of the Institution of Mechanical Engineers, Part B: Management and engineering manufacture. ,vol. 198, pp. 229- 237 ,(1984) , 10.1243/PIME_PROC_1984_198_073_02
Hongxia Zhang, Wuyi Chen, Zhitong Chen, Grindability of high-temperature alloy with ceramic alumina wheels Frontiers of Mechanical Engineering in China. ,vol. 3, pp. 139- 145 ,(2008) , 10.1007/S11465-008-0040-3
Xipeng Xu, Yiqing Yu, XPS and SEM characterization of wheel/workpiece interface in grinding of superalloy Surface and Interface Analysis. ,vol. 33, pp. 343- 350 ,(2002) , 10.1002/SIA.1225
W. Österle, P.X. Li, Mechanical and thermal response of a nickel-base superalloy upon grinding with high removal rates Materials Science and Engineering: A. ,vol. 238, pp. 357- 366 ,(1997) , 10.1016/S0921-5093(97)00457-7
N. Kawagoishi, Q. Chen, E. Kondo, M. Goto, H. Nisitani, Influence of cubic boron nitride grinding on the fatigue strengths of carbon steels and a nickel-base superalloy Journal of Materials Engineering and Performance. ,vol. 8, pp. 152- 158 ,(1999) , 10.1361/105994999770346981
C. Guo, Z. Shi, H. Attia, D. McIntosh, Power and Wheel Wear for Grinding Nickel Alloy with Plated CBN Wheels CIRP Annals. ,vol. 56, pp. 343- 346 ,(2007) , 10.1016/J.CIRP.2007.05.079
Krzysztof Nadolny, Walery Sienicki, Michał Wojtewicz, The effect of sulfurization on the grinding wheel cutting ability in the internal cylindrical grinding of nickel superalloys Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ,vol. 231, pp. 0954405415572643- ,(2017) , 10.1177/0954405415572643
W. Österle, P.X. Li, G. Nolze, Influence of surface finishing on residual stress depth profiles of a coarse-grained nickel-base superalloy Materials Science and Engineering: A. ,vol. 262, pp. 308- 311 ,(1999) , 10.1016/S0921-5093(98)01018-1