Parametric study of GT and ASU integration in case of IGCC with CO2 removal

作者: Marcin Liszka , Jakub Tuka

DOI: 10.1016/J.ENERGY.2012.06.055

关键词:

摘要: Abstract One of the most promising technologies for coal-to-electricity conversion considering CO 2 removal is coal gasification process integrated with a combined cycle (IGCC). ideas IGCC efficiency increase integration including well-known ASU-GT coupling by compressed air and nitrogen streams. In this case, idea based on supplying from GT compressor to ASU where it replaces in electrical-driven compressors. From energy effectiveness point view, should reduce electricity consumption losses auxiliary transformer. It also be noted, that polytropic large compression stages like usually higher than smaller units as The main goal present paper check if air-side has positive impact efficiency, assuming unit syngas-dedicated machine massive applied. general conclusion case dedicated unit, pressure ratio relatively high, not recommended view.

参考文章(5)
AD Rao, J Francuz, H Liao, A Verma, GS Samuelsen, Systems Analyses of Advanced Brayton Cycles For High Efficiency Zero Emission Plants The Regents Of The University Of California. ,(2006) , 10.2172/895342
Marcin Liszka, Tomasz Malik, Giampaolo Manfrida, Energy and exergy analysis of hydrogen-oriented coal gasification with CO2 capture Energy. ,vol. 45, pp. 142- 150 ,(2012) , 10.1016/J.ENERGY.2012.03.054
A.R Smith, J Klosek, A review of air separation technologies and their integration with energy conversion processes Fuel Processing Technology. ,vol. 70, pp. 115- 134 ,(2001) , 10.1016/S0378-3820(01)00131-X
Young Sik Kim, Sung Ku Park, Jong Jun Lee, Do Won Kang, Tong Seop Kim, Analysis of the impact of gas turbine modifications in integrated gasification combined cycle power plants Energy. ,vol. 55, pp. 977- 986 ,(2013) , 10.1016/J.ENERGY.2013.03.041
Chan Lee, Seung Jong Lee, Yongseung Yun, Effect of air separation unit integration on integrated gasification combined cycleperformance and NO x emission characteristics Korean Journal of Chemical Engineering. ,vol. 24, pp. 368- 373 ,(2007) , 10.1007/S11814-007-5047-7