Round robin for testing instrumented indenters with silicon reference springs
作者： Uwe Brand , Thomas Chudoba , Michael Griepentrog , Dieter Schwenk , Gottfried Bosch
DOI: 10.3139/146.111309
关键词:
摘要: For the traceability of hardness and elasticity measurements with instrumented indenters to SI units, a measuring standard based on silicon bending spring stop limit exists. Besides stiffness spring, point measured force–displacement curve at can be used as an additional calibration for both probing force displacement. In round-robin test six participants seven devices stiffness, deflection were compared. The result agree within ±2.8 %, ±4.2 % ±3.2 respectively.
hanser-elibrary.com参考文章(10)
D. Schwenk, K. Herrmann, G. Aggag, F. Menelao, Investigation of a group standard of Rockwell diamond indenters* HTM Härtereitechnische Mitteilungen. ,vol. 63, pp. 162- 167 ,(2008) , 10.3139/105.100457
Joachim Frühauf, Eva Gärtner, Konrad Herrmann, Febo Menelao, Kalibriernormal für Geräte der registrierenden Härteprüfung (Standard for Calibration of Instruments of Hardness Testing) tm - Technisches Messen. ,vol. 74, pp. 385- 392 ,(2007) , 10.1524/TEME.2007.74.7-8.385
Vladimir Nesterov, Facility and methods for the measurement of micro and nano forces in the range below 10?5 N with a resolution of 10?12 N (development concept) Measurement Science and Technology. ,vol. 18, pp. 360- 366 ,(2007) , 10.1088/0957-0233/18/2/S06
Min-Seok Kim, Jon R Pratt, Uwe Brand, Christopher W Jones, Report on the first international comparison of small force facilities: a pilot study at the micronewton level. Metrologia. ,vol. 49, pp. 70- 81 ,(2012) , 10.1088/0026-1394/49/1/011
Richard Leach, Derek Chetwynd, Liam Blunt, Jane Haycocks, Peter Harris, Keith Jackson, Simon Oldfield, Simon Reilly, Recent advances in traceable nanoscale dimension and force metrology in the UK Measurement Science and Technology. ,vol. 17, pp. 467- 476 ,(2006) , 10.1088/0957-0233/17/3/S02
Vladimir Nesterov, A nanonewton force facility and a novel method for measurements of the air and vacuum permittivity at zero frequencies Measurement Science and Technology. ,vol. 20, pp. 084012- ,(2009) , 10.1088/0957-0233/20/8/084012
Min-Seok Kim, Jae-Hyuk Choi, Yon-Kyu Park, Jong-Ho Kim, None, Atomic force microscope cantilever calibration device for quantified force metrology at micro- or nano-scale regime: the nano force calibrator (NFC) Metrologia. ,vol. 43, pp. 389- 395 ,(2006) , 10.1088/0026-1394/43/5/008
Jon R Pratt, John A Kramar, David B Newell, Douglas T Smith, Review of SI traceable force metrology for instrumented indentation and atomic force microscopy Measurement Science and Technology. ,vol. 16, pp. 2129- 2137 ,(2005) , 10.1088/0957-0233/16/11/002
Joost te Riet, Allard J. Katan, Christian Rankl, Stefan W. Stahl, Arend M. van Buul, In Yee Phang, Alberto Gomez-Casado, Peter Schön, Jan W. Gerritsen, Alessandra Cambi, Alan E. Rowan, G. Julius Vancso, Pascal Jonkheijm, Jurriaan Huskens, Tjerk H. Oosterkamp, Hermann Gaub, Peter Hinterdorfer, Carl G. Figdor, Sylvia Speller, Interlaboratory round robin on cantilever calibration for AFM force spectroscopy Ultramicroscopy. ,vol. 111, pp. 1659- 1669 ,(2011) , 10.1016/J.ULTRAMIC.2011.09.012
Richard S. Gates, Mark G. Reitsma, John A. Kramar, Jon R. Pratt, Atomic Force Microscope Cantilever Flexural Stiffness Calibration: Toward a Standard Traceable Method. Journal of Research of the National Institute of Standards and Technology. ,vol. 116, pp. 703- 727 ,(2011) , 10.6028/JRES.116.015