Numerical investigations of 3D printed structures under compressive loads using damage and fracture criterion: Experiments, parameter identification, and validation
作者： Stefan Tabacu , Cătălin Ducu
DOI: 10.1016/J.EML.2020.100775
关键词:
摘要: … cases, although a sharp decrease was recorded for the … stress–strain data displayed a softening characteristic associated with the damage of the structure. The erosion of the material …
sci-hub.st 参考文章(49)
Mahdi Kaveh, Mohsen Badrossamay, Ehsan Foroozmehr, Ardeshir Hemasian Etefagh, Optimization of the printing parameters affecting dimensional accuracy and internal cavity for HIPS material used in fused deposition modeling processes Journal of Materials Processing Technology. ,vol. 226, pp. 280- 286 ,(2015) , 10.1016/J.JMATPROTEC.2015.07.012
R. Venkata Rao, Dhiraj P. Rai, Optimization of fused deposition modeling process using teaching-learning-based optimization algorithm Engineering Science and Technology, an International Journal. ,vol. 19, pp. 587- 603 ,(2016) , 10.1016/J.JESTCH.2015.09.008
C.S. Lee, S.G. Kim, H.J. Kim, S.H. Ahn, Measurement of anisotropic compressive strength of rapid prototyping parts Journal of Materials Processing Technology. ,vol. 187-188, pp. 627- 630 ,(2007) , 10.1016/J.JMATPROTEC.2006.11.095
Sung‐Hoon Ahn, Michael Montero, Dan Odell, Shad Roundy, Paul K. Wright, Anisotropic material properties of fused deposition modeling ABS Rapid Prototyping Journal. ,vol. 8, pp. 248- 257 ,(2002) , 10.1108/13552540210441166
Dario Croccolo, Massimiliano De Agostinis, Giorgio Olmi, Experimental characterization and analytical modelling of the mechanical behaviour of fused deposition processed parts made of ABS-M30 Computational Materials Science. ,vol. 79, pp. 506- 518 ,(2013) , 10.1016/J.COMMATSCI.2013.06.041
M.R. Karamooz Ravari, M. Kadkhodaei, M. Badrossamay, R. Rezaei, Numerical investigation on mechanical properties of cellular lattice structures fabricated by fused deposition modeling International Journal of Mechanical Sciences. ,vol. 88, pp. 154- 161 ,(2014) , 10.1016/J.IJMECSCI.2014.08.009
Gongyao Gu, Yong Xia, Qing Zhou, On the fracture possibility of thin-walled tubes under axial crushing Thin-Walled Structures. ,vol. 55, pp. 85- 95 ,(2012) , 10.1016/J.TWS.2012.03.005
Angel R. Torrado, Corey M. Shemelya, Joel D. English, Yirong Lin, Ryan B. Wicker, David A. Roberson, Characterizing the effect of additives to ABS on the mechanical property anisotropy of specimens fabricated by material extrusion 3D printing Additive manufacturing. ,vol. 6, pp. 16- 29 ,(2015) , 10.1016/J.ADDMA.2015.02.001
Michael Brünig, Steffen Gerke, Vanessa Hagenbrock, Stress-state-dependence of damage strain rate tensors caused by growth and coalescence of micro-defects International Journal of Plasticity. ,vol. 63, pp. 49- 63 ,(2014) , 10.1016/J.IJPLAS.2014.04.007
R.H.J. Peerlings, L.H. Poh, M.G.D. Geers, An implicit gradient plasticity–damage theory for predicting size effects in hardening and softening Engineering Fracture Mechanics. ,vol. 95, pp. 2- 12 ,(2012) , 10.1016/J.ENGFRACMECH.2011.12.016