New foaming agents for aluminum foams
作者： Sergei Ganin , Valerii Tsemenko , Iskandar Masgutov , Vesselin Michailov , Alexey Eremin
DOI: 10.1016/J.MATPR.2019.12.402
关键词:
摘要: Abstract This article provides alternatives to titanium hydride foaming compositions for the production of aluminum foam. Using methods hot plastic deformation, preforms containing various blowing agents were obtained. In laboratory furnace, obtained samples foamed. After that, made and an analysis structure was carried out.
sci-hub.se 参考文章(16)
Hao Qingxian, Qiu Sawei, Hu Yuebo, Development on Preparation Technology of Aluminum Foam Sandwich Panels Rare Metal Materials and Engineering. ,vol. 44, pp. 548- 552 ,(2015) , 10.1016/S1875-5372(15)30036-9
Rossella Surace, Luigi A.C. De Filippis, Investigation and Comparison of Aluminium Foams Manufactured by Different Techniques InTech. ,(2010) , 10.5772/10353
Alexander Yu. Baimakov, Sergey Yu. Petrovich, Vadim A. Lipin, Alexander L. Shahmin, Rustam A. Seytenov, The Influence of Alloying Additions on Interaction of Aluminum Alloys with Aqueous Media Springer, Cham. pp. 387- 391 ,(2015) , 10.1007/978-3-319-48248-4_64
AI Rudskoy, VN Tsemenko, SV Ganin, None, A Study of Compaction and Deformation of a Powder Composite Material of the ‘Aluminum – Rare Earth Elements’ System Metal Science and Heat Treatment. ,vol. 56, pp. 542- 547 ,(2015) , 10.1007/S11041-015-9796-3
S. Yu. Kondrat’ev, O. G. Zotov, O. V. Shvetsov, Structural Stability and Variation of Properties of Aluminum Alloys D16 and 1953 in Production and Operation of Drill Pipes Metal Science and Heat Treatment. ,vol. 55, pp. 526- 532 ,(2014) , 10.1007/S11041-014-9665-5
SA Kotov, VD Andreeva, SV Ganin, BM Freidin, Yu V Kuz’mich, None, Effect of heat treatment on the properties of mechanically alloyed Al-based materials Metal Science and Heat Treatment. ,vol. 49, pp. 574- 577 ,(2007) , 10.1007/S11041-007-0106-6
Tatiana S Kol’tsova, FM Shakhov, AA Voznyakovskii, AI Lyashkov, Oleg V Tolochko, AG Nasibulin, AI Rudskoi, VG Mikhailov, None, Fabrication of a compacted aluminum-carbon nanofiber material by hot pressing Technical Physics. ,vol. 59, pp. 1626- 1630 ,(2014) , 10.1134/S1063784214110139
John Banhart, Light-Metal Foams-History of Innovation and Technological Challenges Advanced Engineering Materials. ,vol. 15, pp. 82- 111 ,(2013) , 10.1002/ADEM.201200217
G. S. Vinod Kumar, M. Mukherjee, F. Garcia-Moreno, J. Banhart, Reduced-Pressure Foaming of Aluminum Alloys Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 44, pp. 419- 426 ,(2013) , 10.1007/S11661-012-1398-8
D. I. Budelovskiy, , S. Yu. Petrovich, V. A. Lipin, V. D. Andreeva, , , , Mechanical alloying of powder alloy Al – Si – Ni with nanosized carbon additions Tsvetnye Metally. pp. 77- 82 ,(2016) , 10.17580/TSM.2016.09.11