Studies on Mechanical and Wear Properties of Al6061/Beryl Composites

作者: Reddappa Hosur Reddappa , Kitakanur Ramareddy Suresh , Hollakere Basavaraj Niranjan , Kestur Gundappa Satyanarayana

DOI: 10.4236/JMMCE.2012.117056

关键词:

摘要: Beryl-Al6061 alloy composites having 2-12 wt% of beryl particles were fabricated by liquid metallurgy (stir cast) method. The tensile and wear properties beryl-Al6061 have been evaluated compared with its base alloy. results revealed that the Al6061-10 shows an improvement 15.38% in strength specific rate decreases 8.9% at normal load 9.81N when to matrix i.e. Significant hardness are noticed as increases. microstructures studied know uniform dispersion matrix. It has observed addition significantly improves ultimate unreinforced

参考文章(18)
William Alexander Deer, J. Zussman, R. A. Howie, Rock-forming minerals Sheet Silicates. ,vol. 3, ,(1962)
S. M. Copley, D. A. Koss, Thermally induced residual stresses in eutectic composites Metallurgical Transactions. ,vol. 2, pp. 1557- 1560 ,(1971) , 10.1007/BF02913877
Richard Aloysius Flinn, Engineering materials and their applications ,(1975)
A. G. Wang, I. M. Hutchings, Wear of alumina fibre–aluminium metal matrix composites by two-body abrasion Materials Science and Technology. ,vol. 5, pp. 71- 76 ,(1989) , 10.1179/MST.1989.5.1.71
M. Taya, K.E. Lulay, D.J. Lloyd, Strengthening of a particulate metal matrix composite by quenching Acta Metallurgica Et Materialia. ,vol. 39, pp. 73- 87 ,(1991) , 10.1016/0956-7151(91)90329-Y
R.J. Arsenault, The strengthening of aluminum alloy 6061 by fiber and platelet silicon carbide Materials Science and Engineering. ,vol. 64, pp. 171- 181 ,(1984) , 10.1016/0025-5416(84)90101-0
K.R. Suresh, H.B. Niranjan, P.Martin Jebaraj, M.P. Chowdiah, Tensile and wear properties of aluminum composites Wear. ,vol. 255, pp. 638- 642 ,(2003) , 10.1016/S0043-1648(03)00292-8
F. M. Hosking, F. Folgar Portillo, R. Wunderlin, R. Mehrabian, Composites of aluminium alloys: fabrication and wear behaviour Journal of Materials Science. ,vol. 17, pp. 477- 498 ,(1982) , 10.1007/BF00591483