Effects of Cryo-Treatment on Corrosion Behavior and Mechanical Properties of Laser-Welded Commercial Pure Titanium
作者： Yanping Zhu , Changyi Li , Lianyun Zhang
DOI: 10.2320/MATERTRANS.M2013373
关键词:
摘要: The objective of this study was to investigate the effects cryo-treatment on microstructure, corrosion behavior, and mechanical properties Ti before after laser welding. microstructure studied by optical microscopy. It found that grain size for became smaller cryo-treatment. Cryo-treatment could also refine stabilize crystal lattice structure distribute precipitate particles throughout material in welded metal. Potentiodynamic polarization measurements were employed behavior an artificial saliva solution. Electrochemical results showed laser-welded exhibited most obvious passivation all specimens. Ti, cryo-treated (C-Ti), (W-Ti), cryo-treated, (CW-Ti) characterized tensile tests. strength elongation be improved without impairing its resistance. [doi:10.2320/matertrans.M2013373]
sci-hub.se 参考文章(23)
Ikuya Watanabe, D. Scott Topham, Laser welding of cast titanium and dental alloys using argon shielding. Journal of Prosthodontics. ,vol. 15, pp. 102- 107 ,(2006) , 10.1111/J.1532-849X.2006.00082.X
Sérgio Luiz de Assis, Stephan Wolynec, Isolda Costa, Corrosion characterization of titanium alloys by electrochemical techniques Electrochimica Acta. ,vol. 51, pp. 1815- 1819 ,(2006) , 10.1016/J.ELECTACTA.2005.02.121
Ikuya Watanabe, D. Scott Topham, Tensile strength and elongation of laser-welded Ti and Ti-6AL-7NB. Journal of Biomedical Materials Research Part B. ,vol. 71, pp. 46- 51 ,(2004) , 10.1002/JBM.B.30058
C. Bertrand, O. Laplanche, J. P. Rocca, Y. Le Petitcorps, S. Nammour, Effect of the combination of different welding parameters on melting characteristics of grade 1 titanium with a pulsed Nd-Yag laser Lasers in Medical Science. ,vol. 22, pp. 237- 244 ,(2007) , 10.1007/S10103-006-0438-2
Mihai V Popa, Ioana Demetrescu, Ecaterina Vasilescu, Paula Drob, Agustin Santana Lopez, Julia Mirza-Rosca, Cora Vasilescu, Daniela Ionita, Corrosion susceptibility of implant materials Ti–5Al–4V and Ti–6Al–4Fe in artificial extra-cellular fluids Electrochimica Acta. ,vol. 49, pp. 2113- 2121 ,(2004) , 10.1016/J.ELECTACTA.2003.12.036
Mau-Chin LIN, Sheng-Chieh LIN, Yu-Tsai WANG, Suh-Woan HU, Tzu-Hsin LEE, Li-Kai CHEN, Her-Hsiung HUANG, Fracture Resistance of Nd:YAG Laser-welded Cast Titanium Joints with Various Clinical Thicknesses and Welding Pulse Energies Dental Materials Journal. ,vol. 26, pp. 367- 372 ,(2007) , 10.4012/DMJ.26.367
T. Shariff, X. Cao, R. R. Chromik, P. Wanjara, J. Cuddy, A. Birur, Effect of joint gap on the quality of laser beam welded near-β Ti-5553 alloy with the addition of Ti–6Al–4V filler wire Journal of Materials Science. ,vol. 47, pp. 866- 875 ,(2012) , 10.1007/S10853-011-5866-0
Han-Sol Kim, Sung-Hwan Lim, In-Dong Yeo, Won-Yong Kim, Stress-induced martensitic transformation of metastable β-titanium alloy Materials Science and Engineering: A. ,vol. 449-451, pp. 322- 325 ,(2007) , 10.1016/J.MSEA.2006.02.329
A.M. Fekry, The influence of chloride and sulphate ions on the corrosion behavior of Ti and Ti-6Al-4V alloy in oxalic acid Electrochimica Acta. ,vol. 54, pp. 3480- 3489 ,(2009) , 10.1016/J.ELECTACTA.2008.12.060
D.S. Nadig, S. Jacob, R. Karunanithi, R. Manjunatha, D. Subramanian, M.V.N. Prasad, Geetha Sen, Abhay K. Jha, Studies of cryotreatment on the performance of integral diaphragm pressure transducers for space application Cryogenics. ,vol. 50, pp. 561- 565 ,(2010) , 10.1016/J.CRYOGENICS.2010.02.016