Effect of silicon carbide and pulping processes on physical and mechanical properties of pulp plastic composites (PPCs)
作者： Alireza Sukhtesaraie , S. Behnam Hosseini
DOI: 10.1016/J.JASCER.2016.01.002
关键词:
摘要: Abstract This study evaluated the effect of different pulping processes and SiC particles on physical mechanical properties pulp plastic composites (PPCs). Polypropylene (PP), SODA NSSC fibers (max. 40 50 wt.%), silicon carbide (0, 5, 10, 15 wt.%), 5 wt.% maleic anhydride polypropylene (MAPP) as coupling agent were used to produce (PPCs) by injection molding. The samples characterized according ASTM standards. illustrated higher values in all except contact angle showed approximately same abrasion resistance compared composites. addition improved negative water absorption, increased both PPCs. By contrast, tensile, flexural, impact decreased increasing particles. In general, 50 wt.% SODA/SiC composite containing 10 wt.% highest efficiency among
core.ac.uk
sci-hub.se 参考文章(46)
G. Amirthan, A. Udayakumar, V.V. Bhanu Prasad, M. Balasubramanian, Synthesis and characterization of Si/SiC ceramics prepared using cotton fabric Ceramics International. ,vol. 35, pp. 967- 973 ,(2009) , 10.1016/J.CERAMINT.2008.04.014
N.E Marcovich, M.I Aranguren, M.M Reboredo, Modified woodflour as thermoset fillersPart I. Effect of the chemical modification and percentage of filler on the mechanical properties Polymer. ,vol. 42, pp. 815- 825 ,(2001) , 10.1016/S0032-3861(00)00286-X
H. D. Rozman, G. S. Tay, R. N. Kumar, A. Abubakar, H. Ismail, Z. A. Mohd. Ishak, Polypropylene Hybrid Composites: A Preliminary Study on the use of Glass and Coconut Fiber as Reinforcements in Polypropylene Composites Polymer-plastics Technology and Engineering. ,vol. 38, pp. 997- 1011 ,(1999) , 10.1080/03602559909351627
Supreeda Jeamtrakull, Apisit Kositchaiyong, Teerasak Markpin, Vichai Rosarpitak, Narongrit Sombatsompop, Effects of wood constituents and content, and glass fiber reinforcement on wear behavior of wood/PVC composites☆ Composites Part B-engineering. ,vol. 43, pp. 2721- 2729 ,(2012) , 10.1016/J.COMPOSITESB.2012.04.031
Jayant B. Gadhe, Ram B. Gupta, Thomas Elder, Surface modification of lignocellulosic fibers using high-frequency ultrasound Cellulose. ,vol. 13, pp. 9- 22 ,(2006) , 10.1007/S10570-005-9018-Z
Jordi Gironès, José Alberto Méndez, Sami Boufi, Fabiola Vilaseca, Pere Mutjé, Effect of silane coupling agents on the properties of pine fibers/polypropylene composites Journal of Applied Polymer Science. ,vol. 103, pp. 3706- 3717 ,(2007) , 10.1002/APP.25104
Laly A. Pothan, Sabu Thomas, Effect of hybridization and chemical modification on the water‐absorption behavior of banana fiber–reinforced polyester composites Journal of Applied Polymer Science. ,vol. 91, pp. 3856- 3865 ,(2004) , 10.1002/APP.13586
M. E. Malunka, A. S. Luyt, H. Krump, Preparation and Characterization of EVA-Sisal Fiber Composites Journal of Applied Polymer Science. ,vol. 100, pp. 1607- 1617 ,(2006) , 10.1002/APP.23650
Xue Li, Lope G. Tabil, Satyanarayan Panigrahi, Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review Journal of Polymers and The Environment. ,vol. 15, pp. 25- 33 ,(2007) , 10.1007/S10924-006-0042-3
A. K. Bledzki, S. Reihmane, J. Gassan, Properties and modification methods for vegetable fibers for natural fiber composites Journal of Applied Polymer Science. ,vol. 59, pp. 1329- 1336 ,(1996) , 10.1002/(SICI)1097-4628(19960222)59:8<1329::AID-APP17>3.0.CO;2-0