Technological evaluation of a novel glycerol based biocide-free metalworking fluid
作者： Marius Winter , Ralf Bock , Christoph Herrmann , Heiko Stache , Hubertus Wichmann
DOI: 10.1016/J.JCLEPRO.2012.05.048
关键词:
摘要: Abstract This paper describes a technological evaluation of novel biocide-free metalworking fluid (MWF) on the basis glycerol/water in comparison to conventional mineral oil based MWFs. For machining experiments grinding machine were performed. A cubic boron nitride (CBN) and an aluminium oxide (Al2O3) wheel tested inner cylindrical process. The tests performed under employment glycerol fluid, emulsion oil. indicated comparable partially better results fluids with regard measured forces, tool wear work piece surface roughness. From chemical point view it was ensured by extensive testing that no adverse reaction- or decomposition products are released from glycerol-based MWF during practical operation. Furthermore, corrosion done. additive enhanced order guarantee full protection for pieces machine.
sci-hub.se 参考文章(13)
Thorsten Bartels, Wolfgang Bock, Jürgen Braun, Christian Busch, Wolfgang Buss, Wilfried Dresel, Carmen Freiler, Manfred Harperscheid, Rolf-Peter Heckler, Dietrich Hörner, Franz Kubicki, Georg Lingg, Achim Losch, Rolf Luther, Theo Mang, Siegfried Noll, Jürgen Omeis, Lubricants and Lubrication Ullmann's Encyclopedia of Industrial Chemistry. ,(2006) , 10.1002/14356007.A15_423
E. Brinksmeier, C. Heinzel, M. Wittmann, Friction, Cooling and Lubrication in Grinding CIRP Annals. ,vol. 48, pp. 581- 598 ,(1999) , 10.1016/S0007-8506(07)63236-3
Taghi Tawakoli, Mohammadjafar Hadad, Mohammad Hossein Sadeghi, Amir Daneshi, Banafsheh Sadeghi, Minimum quantity lubrication in grinding: effects of abrasive and coolant–lubricant types Journal of Cleaner Production. ,vol. 19, pp. 2088- 2099 ,(2011) , 10.1016/J.JCLEPRO.2011.06.020
Hubertus Wichmann, Regina Sprenger, Norbert Ehlers, Müfit Bahadir, Analytical Investigations on a Releasing Agent Application in Aluminium Diecasting (6 pp) Environmental Science and Pollution Research. ,vol. 12, pp. 227- 232 ,(2005) , 10.1065/ESPR2005.04.242
Katharina Heitmann, Hubertus Wichmann, Müfit Bahadir, Chemical causes of the typical burnt smell after accidental fires. Analytical and Bioanalytical Chemistry. ,vol. 395, pp. 1853- 1865 ,(2009) , 10.1007/S00216-009-3071-7
T. Tawakoli, M.J. Hadad, M.H. Sadeghi, A. Daneshi, S. Stöckert, A. Rasifard, An experimental investigation of the effects of workpiece and grinding parameters on minimum quantity lubrication—MQL grinding International Journal of Machine Tools & Manufacture. ,vol. 49, pp. 924- 932 ,(2009) , 10.1016/J.IJMACHTOOLS.2009.06.015
K. Weinert, I. Inasaki, J.W. Sutherland, T. Wakabayashi, Dry Machining and Minimum Quantity Lubrication CIRP Annals. ,vol. 53, pp. 511- 537 ,(2004) , 10.1016/S0007-8506(07)60027-4
Benjamin Katryniok, Sébastien Paul, Mickaël Capron, Franck Dumeignil, Towards the sustainable production of acrolein by glycerol dehydration. Chemsuschem. ,vol. 2, pp. 719- 730 ,(2009) , 10.1002/CSSC.200900134
M Huseyin Cetin, Babur Ozcelik, Emel Kuram, Erhan Demirbas, None, Evaluation of vegetable based cutting fluids with extreme pressure and cutting parameters in turning of AISI 304L by Taguchi method Journal of Cleaner Production. ,vol. 19, pp. 2049- 2056 ,(2011) , 10.1016/J.JCLEPRO.2011.07.013
Yolanda S. Stein, Michael Jerry Antal, Maitland Jones, A study of the gas-phase pyrolysis of glycerol Journal of Analytical and Applied Pyrolysis. ,vol. 4, pp. 283- 296 ,(1983) , 10.1016/0165-2370(83)80003-5