The Research on the Bionic Friction Layers of TiAl-10wt.%V2O5 Nanowires at the Applied Loads of 6-24 N
作者： Kang Yang , Xiaoliang Shi , Jialiang Zou , Amr Rady Radwan , Ahmed Mohamed Mahmoud Ibrahim
DOI: 10.1007/S11665-016-2345-4
关键词:
摘要: The objective of searching the optimum applied load was to minimize friction and decrease wear in mechanical moving components. behaviors TiAl-10wt.%V2O5 nanowires (TiAl-10wt.%V2O5) were evaluated sliding against fixed Al2O3 balls with Vickers hardness 18.07 GPa at loads 6-24 N. testing results showed that smaller coefficient rate obtained 18 N, if compared those 6, 12 24 N. mainly attributed forming cambiform structure large crystalline grain, higher totals oxide interionic potential thickness layer other loads. It obvious 18 N reasonable for obtaining lower less TiAl-10wt.%V2O5.
springer.com
harvard.edu
sci-hub.se 参考文章(24)
Valentin L. Popov, Contact Mechanics and Friction: Physical Principles and Applications ,(2010)
Qingshuai Zhu, Xiaoliang Shi, Wenzheng Zhai, Kang Yang, Ahmed Mohamed Mahmoud Ibrahim, Zengshi Xu, Yecheng Xiao, Ao Zhang, Research on the Thickness of the Friction Layer of Ni3Al Matrix Composites with Graphene Nanoplatelets Tribology Letters. ,vol. 59, pp. 40- ,(2015) , 10.1007/S11249-015-0568-4
Yoshinobu Suzuki, Koshi Adachi, Carbon tribo-layer for super-low friction of amorphous carbon nitride coatings in inert gas environments Surface & Coatings Technology. ,vol. 221, pp. 163- 172 ,(2013) , 10.1016/J.SURFCOAT.2013.01.045
Sivaiah Bathula, M Saravanan, Ajay Dhar, Nanoindentation and Wear Characteristics of Al 5083/SiCp Nanocomposites Synthesized by High Energy Ball Milling and Spark Plasma Sintering Journal of Materials Science & Technology. ,vol. 28, pp. 969- 975 ,(2012) , 10.1016/S1005-0302(12)60160-1
Robert Franz, Christian Mitterer, Vanadium containing self-adaptive low-friction hard coatings for high-temperature applications: A review Surface & Coatings Technology. ,vol. 228, pp. 1- 13 ,(2013) , 10.1016/J.SURFCOAT.2013.04.034
A.R Rastkar, A Bloyce, T Bell, Sliding wear behaviour of two gamma-based titanium aluminides Wear. ,vol. 240, pp. 19- 26 ,(2000) , 10.1016/S0043-1648(00)00334-3
N. Fateh, G. A. Fontalvo, C. Mitterer, Tribological Properties of Reactive Magnetron Sputtered V2O5 and VN–V2O5 Coatings Tribology Letters. ,vol. 30, pp. 21- 26 ,(2008) , 10.1007/S11249-008-9307-4
N.E. Beliardouh, K. Bouzid, C. Nouveau, B. Tlili, M.J. Walock, Tribological and electrochemical performances of Cr/CrN and Cr/CrN/CrAlN multilayer coatings deposited by RF magnetron sputtering Tribology International. ,vol. 82, pp. 443- 452 ,(2015) , 10.1016/J.TRIBOINT.2014.03.018
Long He, Ye-Fa Tan, Xiao-Long Wang, Qi-Feng Jing, Xiang Hong, Tribological properties of laser cladding TiB2 particles reinforced Ni-base alloy composite coatings on aluminum alloy Rare Metals. ,vol. 34, pp. 789- 796 ,(2015) , 10.1007/S12598-014-0299-Y
Takahisa Kato, Masahiro Kawaguchi, Mayeed M Sajjad, Junho Choi, Friction and durability characteristics of ultrathin perfluoropolyether lubricant film composed of bonded and mobile molecular layers on diamond-like carbon surfaces Wear. ,vol. 257, pp. 909- 915 ,(2004) , 10.1016/J.WEAR.2004.05.010