A new approach for free vibration analysis of thin circular cylindrical shell
作者： Li Xuebin
DOI: 10.1016/J.JSV.2006.01.065
关键词:
摘要: A new method for calculating the free vibration frequencies of a thin circular cylindrical shell is presented, based on Flugge's theory equations orthotropic materials. general displacement representation introduced, and type coupled polynomial eigenvalue problem developed in present study. Numerical examples are given isotropic shells. Comparison with that from classical dynamic approach studied frequency an shell.
harvard.edu
elsevier.com
sci-hub.se 参考文章(13)
C.B. Sharma, D.J. Johns, Free vibration of cantilever circular cylindrical shells—A comparative study Journal of Sound and Vibration. ,vol. 25, pp. 433- 449 ,(1972) , 10.1016/0022-460X(72)90192-7
C.B. Sharma, Calculation of natural frequencies of fixed-free circular cylindrical shells Journal of Sound and Vibration. ,vol. 35, pp. 55- 76 ,(1974) , 10.1016/0022-460X(74)90038-8
FLEXURAL VIBRATIONS OF THE WALLS OF THIN CYLINDRICAL SHELLS HAVING FREELY SUPPORTED ENDS Proceedings of The Royal Society A: Mathematical, Physical and Engineering Sciences. ,vol. 197, pp. 238- 256 ,(1949) , 10.1098/RSPA.1949.0061
ROBERT L. GOLDMAN, Mode Shapes and Frequencies of Clamped-Clamped Cylindrical Shells AIAA Journal. ,vol. 12, pp. 1755- 1756 ,(1974) , 10.2514/3.49599
KEVIN FORSBERG, Influence of Boundary Conditions on the Modal Characteristics of Thin Cylindrical Shells AIAA Journal. ,vol. 2, pp. 2150- 2157 ,(1964) , 10.2514/3.55115
Arthur W. Leissa, R. P. Nordgren, Vibration of shells ,(1973)
G.B. Warburton, J. Higgs, Natural frequencies of thin cantilever cylindrical shells Journal of Sound and Vibration. ,vol. 11, pp. 335- 338 ,(1970) , 10.1016/S0022-460X(70)80037-2
G. B. Warburton, Vibration of Thin Cylindrical Shells Archive: Journal of Mechanical Engineering Science 1959-1982 (vols 1-23). ,vol. 7, pp. 399- 407 ,(1965) , 10.1243/JMES_JOUR_1965_007_062_02
R. N. Arnold, G. B. Warburton, The Flexural Vibrations of Thin Cylinders Proceedings of the Institution of Mechanical Engineers. ,vol. 167, pp. 62- 80 ,(1953) , 10.1243/PIME_PROC_1953_167_014_02