Crystallization of CaO–SiO2–TiO2 Slag as a Candidate for Fluorine Free Mold Flux
作者： Hideko Nakada , Kazuhiro Nagata
DOI: 10.2355/ISIJINTERNATIONAL.46.441
关键词:
摘要: The time-temperature-transformation diagram (TTT diagram) of CaO–SiO2–TiO2 slag has been determined by using differential thermal analysis (DTA) in order to investigate the …
sci-hub.se 参考文章(15)
Yutaka Shiraishi, Tunezô Saitô, CaO-SiO2-アルカリ土類金属フッ化物系溶融スラグの粘性について Journal of The Japan Institute of Metals. ,vol. 29, pp. 614- 622 ,(1965) , 10.2320/JINSTMET1952.29.6_614
Takashi Watanabe, Hiroyuki Fukuyama, Kazuhiro Nagata, Stability of Cuspidine (3CaO · 2SiO2 · CaF2 ) and Phase Relations in the CaO–SiO2 –CaF2 System Isij International. ,vol. 42, pp. 489- 497 ,(2002) , 10.2355/ISIJINTERNATIONAL.42.489
Hiroyuki Shibata, Koichi Kondo, Mikio Suzuki, Toshihiko Emi, Thermal Resistance between Solidifying Steel Shell and Continuous Casting Mold with Intervening Flux Film Isij International. ,vol. 36, ,(1996) , 10.2355/ISIJINTERNATIONAL.36.SUPPL_S179
A. Yamauchi, K. Sorimachi, T. Yamauchi, Effect of solidus temperature and crystalline phase of mould flux on heat transfer in continuous casting mould Ironmaking & Steelmaking. ,vol. 29, pp. 203- 207 ,(2002) , 10.1179/030192302225004179
Jung Wook Cho, Toshihiko Emi, Hiroyuki Shibata, Mikio Suzuki, Heat Transfer across Mold Flux Film in Mold during Initial Solidification in Continuous Casting of Steel Isij International. ,vol. 38, pp. 834- 842 ,(1998) , 10.2355/ISIJINTERNATIONAL.38.834
Koichi Tsutsumi, Tetsuya Nagasaka, Mitsutaka Hino, Surface Roughness of Solidified Mold Flux in Continuous Casting Process Isij International. ,vol. 39, pp. 1150- 1159 ,(1999) , 10.2355/ISIJINTERNATIONAL.39.1150
Masahito Hanao, Masayuki Kawamoto, Tadao Watanabe, Influence of Na2O on phase relation between mold flux composition and cuspidine Isij International. ,vol. 44, pp. 827- 835 ,(2004) , 10.2355/ISIJINTERNATIONAL.44.827
Yoshiaki Kashiwaya, Carlos E. Cicutti, Alan W. Cramb, An investigation of the crystallization of a continuous casting mold slag using the single hot thermocouple technique Isij International. ,vol. 38, pp. 357- 365 ,(1998) , 10.2355/ISIJINTERNATIONAL.38.357
Masayuki Kawamoto, Yuichi Tsukaguchi, Norihiro Nishida, Takashi Kanazawa, Sei Hiraki, Improvement of the Initial Stage of Solidification by Using Mild Cooling Mold Powder Isij International. ,vol. 37, pp. 134- 139 ,(1997) , 10.2355/ISIJINTERNATIONAL.37.134
Akira Yamauchi, Kenichi Sorimachi, Toshikazu Sakuraya, Tetsuya Fujii, Heat Transfer between Mold and Strand through Mold Flux Film in Continuous Casting of Steel Isij International. ,vol. 33, pp. 140- 147 ,(1993) , 10.2355/ISIJINTERNATIONAL.33.140