Effects of cold severe plastic deformation and heating on dendritic and non-dendritic structures: A356 alloy
作者： A. Dodangeh , M. Kazeminezhad , H. Aashuri
DOI: 10.1179/1743133614Y.0000000116
关键词:
摘要: AbstractIn this research the effects of cold deformation and heating to semi-solid temperature on microstructure mechanical properties cast dendritic non-dendritic structures A356 alloy were investigated. To produce samples, slurry was obtained by electromagnetic stirring rheoforged then samples heated temperature. In order impose multidirectional forging process used. Non-dendritic deformed with applying one three passes kept at range again. Microstructural after before The structure pass reach a different strain induced melt activation process. Micro macro hardness...
maneyonline.com参考文章(31)
R. Canyook, J. Wannasin, S. Wisuthmethangkul, M.C. Flemings, Characterization of the microstructure evolution of a semi-solid metal slurry during the early stages Acta Materialia. ,vol. 60, pp. 3501- 3510 ,(2012) , 10.1016/J.ACTAMAT.2012.03.002
P. Cavaliere, E. Cerri, P. Leo, Effect of heat treatments on mechanical properties and damage evolution of thixoformed aluminium alloys Materials Characterization. ,vol. 55, pp. 35- 42 ,(2005) , 10.1016/J.MATCHAR.2005.02.006
Minoru Furukawa, Zenji Horita, Minoru Nemoto, Terence G. Langdon, The use of severe plastic deformation for microstructural control Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 324, pp. 82- 89 ,(2002) , 10.1016/S0921-5093(01)01288-6
Gang Wan, P.R. Sahm, Ostwald ripening in the isothermal rheocasting process Acta Metallurgica et Materialia. ,vol. 38, pp. 967- 972 ,(1990) , 10.1016/0956-7151(90)90168-G
Toshio Haga, Shinsuke Suzuki, Casting of aluminum alloy ingots for thixoforming using a cooling slope Journal of Materials Processing Technology. ,vol. 118, pp. 169- 172 ,(2001) , 10.1016/S0924-0136(01)00888-3
P.K. Seo, C.G. Kang, The effect of raw material fabrication process on microstructural characteristics in reheating process for semi-solid forming Journal of Materials Processing Technology. ,vol. 162, pp. 402- 409 ,(2005) , 10.1016/J.JMATPROTEC.2005.02.012
T. Sakai, H. Miura, X. Yang, Ultrafine grain formation in face centered cubic metals during severe plastic deformation Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 499, pp. 2- 6 ,(2009) , 10.1016/J.MSEA.2007.11.098
T.J Chen, Y Hao, J Sun, Microstructural evolution of previously deformed ZA27 alloy during partial remelting Materials Science and Engineering: A. ,vol. 337, pp. 73- 81 ,(2002) , 10.1016/S0921-5093(02)00018-7
Toshio Haga, Semisolid strip casting using a twin roll caster equipped with a cooling slope Journal of Materials Processing Technology. ,vol. 130, pp. 558- 561 ,(2002) , 10.1016/S0924-0136(02)00765-3
M. Haghshenas, A. Zarei-Hanzaki, H. Sabetghadam, The room temperature mechanical properties of a thermo-mechanically processed Thixocast A356 aluminum alloy Journal of Alloys and Compounds. ,vol. 477, pp. 250- 255 ,(2009) , 10.1016/J.JALLCOM.2008.10.090