Durability behavior of steelmaking slag masonry mortars
作者： I. Santamaría-Vicario , A. Rodríguez , C. Junco , S. Gutiérrez-González , V. Calderón
DOI: 10.1016/J.MATDES.2016.02.080
关键词:
摘要: Abstract A durability study is presented of masonry mortars prepared with varying quantities electric-arc furnace slag (EAFS) and ladle (LFS) in the same mixtures, substitution natural fine aggregate. The behavior subjected to freeze-thaw cycles, wet-dry marine environments, salt crystallization tests, industrial atmospheres (Kesternich test) studied. Comparative results are reported for these different dosages steel aggregates (between 25% 100%), aggregate mortars, which moreover employ commercial additives their mixtures. Having finalized accelerated aging specimens tested under compression flexion mechanical strengths after 90 days curing compared materials without aging. tests confirmed long-term that included large amounts waste. These can contribute achieving goals maximum resource exploitation progressive waste reduction towards society advancing.
sci-hub.se 参考文章(14)
E.K. Anastasiou, A. Liapis, I. Papayianni, Comparative life cycle assessment of concrete road pavements using industrial by-products as alternative materials Resources Conservation and Recycling. ,vol. 101, pp. 1- 8 ,(2015) , 10.1016/J.RESCONREC.2015.05.009
I. Santamaría-Vicario, A. Rodríguez, S. Gutiérrez-González, V. Calderón, Design of masonry mortars fabricated concurrently with different steel slag aggregates Construction and Building Materials. ,vol. 95, pp. 197- 206 ,(2015) , 10.1016/J.CONBUILDMAT.2015.07.164
A. Rodríguez, S. Gutiérrez-González, M. I. Prieto, A. Cobo, V. Calderón, Analysis of long‐term corrosion behavior in mortars containing recycled ladle furnace slag using computerized tomography and SEM Materials and Corrosion-werkstoffe Und Korrosion. ,vol. 66, pp. 199- 205 ,(2015) , 10.1002/MACO.201407697
Serdar Aydın, Bülent Baradan, Mechanical and microstructural properties of heat cured alkali-activated slag mortars Materials & Design. ,vol. 35, pp. 374- 383 ,(2012) , 10.1016/J.MATDES.2011.10.005
C. Junco, J. Gadea, A. Rodríguez, S. Gutiérrez-González, V. Calderón, Durability of lightweight masonry mortars made with white recycled polyurethane foam Cement & Concrete Composites. ,vol. 34, pp. 1174- 1179 ,(2012) , 10.1016/J.CEMCONCOMP.2012.07.006
M.L. Berndt, Properties of sustainable concrete containing fly ash, slag and recycled concrete aggregate Construction and Building Materials. ,vol. 23, pp. 2606- 2613 ,(2009) , 10.1016/J.CONBUILDMAT.2009.02.011
Cahit Bilim, Okan Karahan, Cengiz Duran Atiş, Serhan İlkentapar, Influence of admixtures on the properties of alkali-activated slag mortars subjected to different curing conditions Materials & Design. ,vol. 44, pp. 540- 547 ,(2013) , 10.1016/J.MATDES.2012.08.049
S. Gutiérrez-González, J. Gadea, A. Rodríguez, M.T. Blanco-Varela, V. Calderón, Compatibility between gypsum and polyamide powder waste to produce lightweight plaster with enhanced thermal properties Construction and Building Materials. ,vol. 34, pp. 179- 185 ,(2012) , 10.1016/J.CONBUILDMAT.2012.02.061
José T. San-José, Iñigo Vegas, Idoia Arribas, Ignacio Marcos, The performance of steel-making slag concretes in the hardened state Materials & Design. ,vol. 60, pp. 612- 619 ,(2014) , 10.1016/J.MATDES.2014.04.030
Marcin Koniorczyk, Dariusz Gawin, Modelling of salt crystallization in building materials with microstructure – Poromechanical approach Construction and Building Materials. ,vol. 36, pp. 860- 873 ,(2012) , 10.1016/J.CONBUILDMAT.2012.06.035