Design of masonry mortars fabricated concurrently with different steel slag aggregates
作者： I. Santamaría-Vicario , A. Rodríguez , S. Gutiérrez-González , V. Calderón
DOI: 10.1016/J.CONBUILDMAT.2015.07.164
关键词: Ladle furnace 、 Mortar 、 Aggregate (composite) 、 Metallurgy 、 Masonry 、 Slag 、 Materials science 、 Reuse 、 Mechanical strength 、 Composite material 、 Electric arc furnace
摘要: Abstract The simultaneous application of electric arc furnace slag and ladle white slag, in substitution natural fine aggregate masonry mortars, is presented with the principal objective achieving mixes that show a similar performance to conventional mortars. Materials dosed steel fines at different levels (25%, 50%, 75% 100%) were designed, employing commercial admixtures samples. A comparative study most significant mortar properties conducted, such as workability, adhesiveness, water retentivity mechanical strength, between mortars prepared those manufactured additions slag. results indicate technically viable may be obtained for their use construction building, which thereby achieve reuse valorization waste products would otherwise disposed landfill sites.
elsevier.com
sci-hub.se 参考文章(16)
M. Frías, J. T. San-José, I. Vegas, Árido siderúrgico en hormigones: proceso de envejecimiento y su efecto en compuestos potencialmente expansivos Materiales De Construccion. ,vol. 60, pp. 33- 46 ,(2010) , 10.3989/MC.2019.45007
A. Rodríguez, S. Gutiérrez-González, M. I. Prieto, A. Cobo, V. Calderón, Analysis of long‐term corrosion behavior in mortars containing recycled ladle furnace slag using computerized tomography and SEM Materials and Corrosion-werkstoffe Und Korrosion. ,vol. 66, pp. 199- 205 ,(2015) , 10.1002/MACO.201407697
Carlo Pellegrino, Paolo Cavagnis, Flora Faleschini, Katya Brunelli, Properties of concretes with Black/Oxidizing Electric Arc Furnace slag aggregate Cement & Concrete Composites. ,vol. 37, pp. 232- 240 ,(2013) , 10.1016/J.CEMCONCOMP.2012.09.001
Marco Pasetto, Nicola Baldo, Laboratory investigation on foamed bitumen bound mixtures made with steel slag, foundry sand, bottom ash and reclaimed asphalt pavement Road Materials and Pavement Design. ,vol. 13, pp. 691- 712 ,(2012) , 10.1080/14680629.2012.742629
Eleftherios K. Anastasiou, Ioanna Papayianni, Michail Papachristoforou, Behavior of self compacting concrete containing ladle furnace slag and steel fiber reinforcement Materials & Design. ,vol. 59, pp. 454- 460 ,(2014) , 10.1016/J.MATDES.2014.03.030
J. Setién, D. Hernández, J.J. González, Characterization of ladle furnace basic slag for use as a construction material Construction and Building Materials. ,vol. 23, pp. 1788- 1794 ,(2009) , 10.1016/J.CONBUILDMAT.2008.10.003
Juan M. Manso, Ángel Rodriguez, Ángel Aragón, Javier J. Gonzalez, The durability of masonry mortars made with ladle furnace slag Construction and Building Materials. ,vol. 25, pp. 3508- 3519 ,(2011) , 10.1016/J.CONBUILDMAT.2011.03.044
G. Adegoloye, A.-L. Beaucour, S. Ortola, A. Noumowé, Concretes made of EAF slag and AOD slag aggregates from stainless steel process: Mechanical properties and durability Construction and Building Materials. ,vol. 76, pp. 313- 321 ,(2015) , 10.1016/J.CONBUILDMAT.2014.12.007
José T. San-José, Iñigo Vegas, Idoia Arribas, Ignacio Marcos, The performance of steel-making slag concretes in the hardened state Materials & Design. ,vol. 60, pp. 612- 619 ,(2014) , 10.1016/J.MATDES.2014.04.030
Ioannis Liapis, Ioanna Papayianni, Advances in chemical and physical properties of electric arc furnace carbon steel slag by hot stage processing and mineral mixing. Journal of Hazardous Materials. ,vol. 283, pp. 89- 97 ,(2015) , 10.1016/J.JHAZMAT.2014.08.072