Effect of cutting parameters on surface residual stresses in dry turning of AISI 1035 alloy
作者： K. h. Salman , Ammar H. Elsheikh , M. Ashham , Mohammed Kamal Ahmed Ali , Maher Rashad
DOI: 10.1007/S40430-019-1846-0
关键词:
摘要: Residual stresses (RSes) induced by turning processes have a great effect on the material properties of machined components and their abilities to withstand severe loading conditions (creep, fatigue, stress corrosion cracking). The final state RSes in workpiece depends its employed cutting parameters/conditions such as speed, depth cut, feed tool geometry, wear tool, coating, cooling. This study introduces comprehensive investigation effects different parameters, speed (30, 60, 90 m/min), (0.05, 0.1, 0.3 mm/rev), cut (0.1, 0.5, 1 mm) well geometry nose radius (0.397, 0.794, 1.191 mm), coating (coated uncoated) force, maximum temperature, surface microstructure, residual during AISI 1035 alloy steel. were measured using X-ray diffraction technique. experiments designed Taguchi method based L18 orthogonal array, significance level parameters been determined via applying analysis variance. Numerical simulations carried out commercial machining software AdvantEdge.
springer.com
sci-hub.se 参考文章(76)
Edoardo Capello, Residual stresses in turning. Part II: Influence of the machined material Journal of Materials Processing Technology. ,vol. 172, pp. 319- 326 ,(2006) , 10.1016/J.JMATPROTEC.2005.10.009
Ismail C. Noyan, Jerome B. Cohen, Determination of Strain and Stress Fields by Diffraction Methods Springer New York. pp. 117- 163 ,(1987) , 10.1007/978-1-4613-9570-6_5
Itxaso Cascón, Jon Ander Sarasua, Mechanistic Model for Prediction of Cutting Forces in Turning of Non-axisymmetric Parts Procedia CIRP. ,vol. 31, pp. 435- 440 ,(2015) , 10.1016/J.PROCIR.2015.03.084
Fuat Kara, Kubilay Aslantaş, Adem Çiçek, Prediction of cutting temperature in orthogonal machining of AISI 316L using artificial neural network soft computing. ,vol. 38, pp. 64- 74 ,(2016) , 10.1016/J.ASOC.2015.09.034
Daniel Hioki, Anselmo E. Diniz, Amilton Sinatora, Influence of HSM cutting parameters on the surface integrity characteristics of hardened AISI H13 steel Journal of The Brazilian Society of Mechanical Sciences and Engineering. ,vol. 35, pp. 537- 553 ,(2013) , 10.1007/S40430-013-0050-X
J.-L. Bobet, C. Masuda, Measurements of thermal residual stresses in SiC/Ti-15-3 composites Journal of Thermal Stresses. ,vol. 19, pp. 579- 593 ,(1996) , 10.1080/01495739608946195
Sanjeev Saini, Inderpreet Singh Ahuja, Vishal S. Sharma, Modelling the effects of cutting parameters on residual stresses in hard turning of AISI H11 tool steel The International Journal of Advanced Manufacturing Technology. ,vol. 65, pp. 667- 678 ,(2013) , 10.1007/S00170-012-4206-0
Meng Liu, Jun-ichiro Takagi, Akira Tsukuda, Effect of tool nose radius and tool wear on residual stress distribution in hard turning of bearing steel Journal of Materials Processing Technology. ,vol. 150, pp. 234- 241 ,(2004) , 10.1016/J.JMATPROTEC.2004.02.038
M.N. James, M. Newby, P. Doubell, D.G. Hattingh, K. Serasli, D.J. Smith, Weld residual stresses near the bimetallic interface in clad RPV steel: A comparison between deep-hole drilling and neutron diffraction data Nuclear Engineering and Design. ,vol. 274, pp. 56- 65 ,(2014) , 10.1016/J.NUCENGDES.2014.03.042
J.C. Outeiro, D. Umbrello, R. M’Saoubi, Experimental and numerical modelling of the residual stresses induced in orthogonal cutting of AISI 316L steel International Journal of Machine Tools & Manufacture. ,vol. 46, pp. 1786- 1794 ,(2006) , 10.1016/J.IJMACHTOOLS.2005.11.013