Effect of preparation conditions on the properties of a coal-derived activated carbon honeycomb monolith

作者: Laishuan Liu , Zhenyu Liu , Jianli Yang , Zhanggen Huang , Zenghou Liu

DOI: 10.1016/J.CARBON.2007.08.006

关键词:

摘要: Activated carbon honeycomb (ACH) monoliths were prepared by extruding of a mixture bituminous coal and organic additives subsequent carbonization steam activation. Preparation parameters that varied temperature activation time. The conditions 500, 650 800 °C for 1 h the 850 2, 4 6 h. at various states characterized SEM, XRD, nitrogen adsorption compression test. It was found has significant effects on pore size distribution mechanical strength ACH monoliths. from high temperatures exhibited lower values BET surface area total volume higher value than those low temperatures. This attributed to effect results in formation relatively less defective structures.

参考文章(23)
Frank R. Rhodes, John C. Mccue, Jack H. L'amoreaux, Minwoo Park, Frederick S. Baker, Robert K. Beckler, Adsorptive monolith including activated carbon, method for making said monolith, and method for adsorbing chemical agents from fluid streams ,(1999)
H. Takagi, K. Maruyama, N. Yoshizawa, Y. Yamada, Y. Sato, XRD analysis of carbon stacking structure in coal during heat treatment Fuel. ,vol. 83, pp. 2427- 2433 ,(2004) , 10.1016/J.FUEL.2004.06.019
K.P Gadkaree, M Jaroniec, Pore structure development in activated carbon honeycombs Carbon. ,vol. 38, pp. 983- 993 ,(2000) , 10.1016/S0008-6223(99)00204-3
Girish Ballal, Kyriacos Zygourakis, Evolution of pore surface area during noncatalytic gas-solid reactions. 2. Experimental results and model validation Industrial & Engineering Chemistry Research. ,vol. 26, pp. 1787- 1796 ,(1987) , 10.1021/IE00069A012
M Yates, J Blanco, M.A Martin-Luengo, M.P Martin, Vapour adsorption capacity of controlled porosity honeycomb monoliths Microporous and Mesoporous Materials. ,vol. 65, pp. 219- 231 ,(2003) , 10.1016/J.MICROMESO.2003.08.009
R. O. Grisdale, The Properties of Carbon Contacts Journal of Applied Physics. ,vol. 24, pp. 1288- 1296 ,(1953) , 10.1063/1.1721148
Th Vergunst, F Kapteijn, J.A Moulijn, Preparation of carbon-coated monolithic supports Carbon. ,vol. 40, pp. 1891- 1902 ,(2002) , 10.1016/S0008-6223(02)00034-9
K. Gergova, N. Petrov, V. Minkova, A comparison of adsorption characteristics of various activated carbons Journal of Chemical Technology & Biotechnology. ,vol. 56, pp. 77- 82 ,(2007) , 10.1002/JCTB.280560114
Laishuan Liu, Zhenyu Liu, Zhanggen Huang, Zenghou Liu, Pingguang Liu, Preparation of activated carbon honeycomb monolith directly from coal Carbon. ,vol. 44, pp. 1598- 1601 ,(2006) , 10.1016/J.CARBON.2006.02.014
M. Yates, J. Blanco, P. Avila, M.P. Martin, Honeycomb monoliths of activated carbons for effluent gas purification Microporous and Mesoporous Materials. ,vol. 37, pp. 201- 208 ,(2000) , 10.1016/S1387-1811(99)00266-8